Amiea Med EXCEED Instrucciones De Uso página 37

SYM-
MEANING
BOL
Device corresponds to the requirements of the
Australia and New Zealand Regulatory Compli-
ance
Conformity of the power supply with FCC rule
part 15, class B have been demonstrated with a
standard output load.
3 S C O P E O F D E L I V E R Y
1 Controller
1 Handpiece
1 Handpiece cable
1 Power supply
1 each of country-specific adapters (EU, UK, AU)
1 Foot switch
1 Handpiece tray
4 P R O D U C T I N F O R M A T I O N
4.1 Technical data
Device type AD61MP
Nominal voltage 15 V - DC
Power consump- max. 27 VA
tion
Power supply Model number:
model GTM96180-1817.9-2.9
Part number: WR9QG1200CSP-
CR6B2958 (GlobTek)
Protection class 2
Penetration 100-150 Hz (± 10%)
frequency
Drive Precision motor - DC
Operating mode Continuous operation
Dimensions 196 mm x 52 mm x 175 mm
(W x H x D)
Handpiece weight approx. 80 g
Total weight approx. 1100 g
Applied part Handpiece, type B
Needle protrusion 0 mm to 1.9 mm (± 0.15 mm)
depth
EXCEED
SYM-
MEANING
BOL
Conformity of the power supply with Industry
Canada, class B have been demonstrated with
CAN
ICES-3(B)/NMB-3(B)
a standard output load.
See operating manual for further information
1 Operating manual
1 Declaration of Conformity
1 Inspection report for safety inspection ("STK report")
The safety cartridges and handpiece covers required for op-
eration (E-0610) are not included in the delivery. Suitable
accessory parts for the handpiece can be obtained via au-
thorised retailers, see "4.3 Accessories and spare parts" on
page 37.
4.2 Operating conditions
Ambient +15°C to +25°C
temperature
Relative humidity 30% to 75%
Air pressure 700 hPa to 1070 hPa
4.3 Accessories and spare parts
The following accessories and spare parts can be pur-
chased from authorised retailers.
ACCES- ARTICLE
SORIES DESCRIPTION
Safety EMNPAED06MP
cartridges (6-MNP 1.5-Exceed)
Handpiece E-0610
cover for
handpiece
PIECE/
SCOPE
PACK-
OF DE-
AGED
LIVERY
UNIT
– 8
– 16
EN 37