FRE-
TEST
RA-
QUEN-
FRE-
DIO
CY
QUEN-
SER-
BAND
CY
VICE*
[MHZ]*
LTE
band
1, 3, 4,
25,
UMTS
2450
2400
Blueto
to
oth,
2570
WLAN
802.1
1 b/
g/n,
RFID
2450,
LTE
band
7
5240
5100
WLAN
to
802.1
5500
5800
1 a/n
5785
* With some radio services, only the Uplink channel is con-
sidered.
** The carrier is modulated with a square wave signal with
50% duty cycle.
*** As an alternative to FM modulation, pulse modulation
can be used of 50% at 18 Hz, because this would be the
worst case although this does not constitute actual modula-
tion.
The device must be set up and put into operation with con-
sideration to the EMC information, this applies in particular
to the distances from other devices emitting radio waves.
Never use the device at a distance of less than 30 cm from
another device emitting radio waves.
In the event of unlikely interference, which could be caused
by devices emitting radio waves, observe the minimum dis-
tances and move the device away from any radio waves if
necessary.
52
EN
MODU-
MAX.
DIS-
LA-
POWER
TANCE
TION**
[W]
[M]
Pulse
2
0.3
modu-
(12
la-
inch)
tion**
217
Hz
Pulse
0.2
0.3
modu-
(12
la-
inch)
tion**
217
Hz
IM-
MUNI-
TY
TEST-
ING
[V/M]
28
9
EXCEED