Publicidad
Idiomas disponibles
Idiomas disponibles
To toggle between the three menu items:
Press the right button (
E
menu item.
Press the left button (
E
menu item.
To exit the menu:
Switch to the "EXIT" menu item.
E
EXIT
QUIT
Press the SET button (
E
Alternative:
Press the Standby/On button (
E
Alternative:
Simultaneously press both the left (
E
buttons.
Alternative:
Wait approx. one minute until the menu automatically
E
closes.
6.2.1 Switching the key tones on and off
You can switch the key tones on and off.
Switch to the "KEY TONES" menu item.
E
KEY TONES
ON
Press the SET button (
E
the key tones ("ON" or "OFF").
6.2.2 Selecting the foot switch mode
You can select between two modes for operating the foot
switch:
"ON/OFF" (switch mode): The handpiece is alternately
O
switched on and off again when pressing the foot
switch.
"CONTINUAL" (jog mode): The handpiece remains oper-
O
ating until the foot switch is pressed.
EXCEED
) to navigate to the next
) to navigate to the previous
SET
).
).
) and right (
SET
) to change the setting for
Switch to the "FOOT SWITCH MODE" menu item.
E
FOOT SWITCH MODE
CONTINUAL
Press the SET button (
E
the foot switch mode.
6.3 Switching the handpiece on and off
CAUTION
Danger of injury when using the handpiece
If an unsecured handpiece is switched on, it may move
uncontrollably through vibrations and cause injury.
Hold the handpiece firmly before switching it on or
E
place it in the handpiece tray.
)
To switch on the handpiece:
Ensure that the power supply is established (see
E
chapter "5.2 Connecting the power supply" on page 39).
Ensure that the controller is switched to operating mode
E
(see chapter "6.1 Switching the control unit to operating
mode or standby mode" on page 42)
Ensure that the handpiece is correctly connected (see
E
chapter "5.4 Connecting the handpiece" on page 40).
Press the SET button (
E
Ongoing handpiece operation is indicated on the con-
troller display by a rotating symbol
If the connected handpiece does not start:
Observe the chapter "10 Questions and problems" on
E
page 47.
To switch off the handpiece:
Press the SET button (
E
Alternatively, you can switch the handpiece on and off with
the foot switch. The foot switch function depends on the
foot switch mode setting in the device menu (see chapter
"6.2.2 Selecting the foot switch mode" on page 43).
When using the switch mode ("ON/OFF"):
Briefly press the foot switch to switch the handpiece on
E
or off.
SET
) to change the setting for
) on the controller.
.
) again.
EN
43
Publicidad
