EMAK SATR 15,5 H Manual De Usuario página 32

d) Connect the battery:
Depending on the machine's design, the battery is located either in a box below
the seat or under the front bonnet.
Loosen the bolts on the battery's pole terminals.

Attach the red cable to the battery's positive (+) pole and secure it with the bolt.

Attach the brown cable to the battery's negative (–) pole and secure it with the bolt.

- Connecting the cables backwards can damage the machine.
- When disconnecting the battery, always disconnect the negative (–) terminal first.
- When installing, using and maintaining the battery, follow the instructions described in the
battery manual. At the same time, observe all of the manual's safety instructions.
3.3.2 GRASS CATCHER (only present in types AJ102, AJ102 4x4 and AG 122)
The grass catcher is delivered in a separate box. Some of its parts have been dismantled for transport
and must be assembled first. Later chapters give a rough outline on assembling it. The complete process
is shown on the DVD that is included or can be sent upon request.
 TOOLS NEEDED
Prepare the following tools for assembling the catcher:
A knife for removing packing

material
 UNPACKING
Remove the packing material. First take out the lid, frame and sack and then the wrapped individual
parts. Unpack these parts and clearly organize them in an appropriate place.
 PACKAGE CONTENTS
300-litre grass catcher
(1) - Lid
(2) - Lifting lever
(3) - Lower tube
(4) - Corner braces (left and right)
(5) - Lower brace
(6) - Side struts
(8) - Fastening bolts, nuts and washers
(9) - Handle
(10) - Lower bracket
(11) - Sack
(12) - Frame
A set of hexagonal socket

wrenches and hex wrenches
360-litre grass catcher
3.3.2a
(1) - Lid
(2) - Lifting lever
(3) - Lower tube
(4) - Corner braces (left and right)
(5) - Lower brace
(6) - Side struts
(7) - Metal sheet
(8) - Fastening bolts, nuts and washers
(9) - Handle
(10) - Lower bracket
(11) - Sack
(12) - Frame
32
Phillips screwdrivers or an

electrical hand screwdriver
3.3.1d
3.3.2b