EMAK SATR 15,5 H Manual De Usuario página 39

 SETTING THE LEVER TO MULCH
(1) Default state
(2) Lift lever
(3) Turn it to the left (counter-clockwise)
(4) Push the lever down
4.2.1a
(5) Turn it to the right (clockwise)
(6) The lever will move down to the correct position by itself
 SETTING THE LEVER TO COLLECT GRASS
(1) Default state
(2) Lift lever
(3) Turn it to the left (counter-clockwise)
4.2.1b
(4) Turn it to the right (clockwise)
(5) The lever will move downward by itself to a position that does not impede work
So that the mulching lid will work correctly, after finishing work, thoroughly clear the mowing
mechanism and discharge tube of clippings and contaminants.
(9) FORWARD DRIVE PEDAL
This pedal controls the drive wheels and regulates the machine's forward movement.
ATTENTION: A forward/backward change in direction is possible only after the
machine has stopped!
(10) BACKUP PEDAL
This pedal controls the drive wheels and regulates the machine's backward movement.
A forward/backward change in direction is possible only after the machine has
stopped!
(11) MOWING MECHANISM HEIGHT ADJUSTMENT LEVER
This lever sets the height of the mowing mechanism from the ground.
The closer to the floor you press the pedal, the faster the machine goes, and
vice versa.
When released, the pedal automatically returns to the neutral position and the
machine stops.
For more details 5.5.
The closer to the floor you press the pedal, the faster the machine goes, and
vice versa.
When released, the pedal automatically returns to the neutral position and the
machine stops.
For more details 5.5.
The lever has 7 working positions for cutting heights from 3 to 9 cm. (type
AJ102 a AJ102 4x4), height 4 to 10 cm (type AJ110) and 3 to 8 cm (type AG
122).
The higher the lever's position number, the taller the grass will be after cutting.
39