Installation, Connection And Set-Up; Cutting Unit Assembly - Metcalfe TR 75 Manual De Instrucciones Para Uso Y Manutención

5. INSTALLATION, CONNECTION
AND SET-UP
Install and use the machine in a room that
can be efficiently ventilated, and where the
floor is smooth and compact and easy to
clean.
WARNING: While the machine is
operating, in order to obtain a product
with the right thickness and humidity,
avoid air currents which will cause pre-
cocious drying of the product together
with its deterioration.
To ensure the necessary stability of the
machine, check that the wheels rest firmly
on the floor, otherwise move the machine sli-
ghtly until the four wheels have been steadily
laid on the ground. Lastly, clamp the wheel
with the brake (Fig. 26
Position the machine in the desired place
with a free back space of around 50 centi-
meters and a side space of 70-80 centime-
ters (Fig. 27) in order to guarantee easy use
of the machine and its cleaning.
For machines fitted with a trolley, make
sure that the brake provided is clamped by
pulling the lever down (Fig. 26
Check that the voltage of the machine which
is written on the identification label, (Fig. 28)
matches the one foreseen by the system on
your premises.
Attach the right plug to the machine power
cable in order to make the electrical connec-
tion to the system.
WARNING: Have the plug fitted to
the power supply by qualified person-
nel. Take the necessary precautions to
prevent the cable from being crimped
or damaged.

5.1 CUTTING UNIT ASSEMBLY

Remove the components in the tank.
Assemble the cutting unit, after removing
).
A
).
B
B
Fig. 26
70÷80
cm
Fig. 27
42
A
50
cm
70÷80
cm
MODELLO
N° DI SERIE
ANNO
VOLT
Hz
Kw
PESO
MADE IN ITALY