Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 14

7 Analog Input
Connect analog sources for archiving via the analog stereo left and right RCA connectors,
the single BNC composite input or via the component in.
8 Remote
There are two RS-422 DB9 connectors for remote in and out.
When remote is enabled, you can mirror the transport controls from one HyperDeck to
multiple additional HyperDeck units. Daisy chain your HyperDecks by connecting the
remote out connector from the master HyperDeck to the remote in connector on a second
unit, then continue the RS-422 chain for additional units. When all additional units have
their remote setting enabled, transport controls on the master unit will also control the
additional units.
For example, when you press the 'record' button on the master HyperDeck, all the
additional HyperDecks connected will begin recording simultaneously.
9 USB
Use the USB-C connector with the white surround for software updates via a computer
using the HyperDeck Setup Utility.
10 Ethernet
A 10Gb/s Ethernet connection lets you connect directly to your network for recording and
playback with Blackmagic Cloud Store or other network storage. Access media recorded
onto CFast cards or external disk via the web media manager or an FTP client for fast
transfers or control the unit remotely using HyperDeck Ethernet Protocol.
Connect to the same network as an ATEM Switcher and you can use your HyperDeck
for playback using the HyperDecks palette in ATEM Software Control or via an
ATEM broadcast panel. For more details on transferring files via an FTP client, see the
'transferring files over a network' section later in this manual.
11 Time Code
Receive external timecode via the XLR timecode inputs or loop out timecode via the XLR
timecode out connection. For more information on how to select your timecode options,
see the 'setup' menu later in this manual.
12 Ref
HyperDeck Extreme disk recorders feature a stabilized video reference output
corresponding to standard definition black burst and high definition tri-sync standards.
You can also receive reference signals from external sources such as a sync generator.
This means you can have multiple devices in your facility receiving a reference signal from
a single source, such as the Blackmagic Sync Generator, to genlock all your equipment
together! Select between the input and external reference source via the touchscreen
setup menu.
For more information on selecting your reference source, see 'setup' menu later in
the manual.
13 HDMI
The HDMI connections are perfect for when you're using the unit as a field recorder and
connecting to an HDMI enabled display for playback. For signals from standard definition
to 2160p60, the HDMI input will auto detect SDR and HDR video standards when the signal
is flagged with the correct metadata. This means you can display stunning HDR images on
HDR enabled HDMI screens using the HDMI out.
HyperDeck Extreme Rear Panel 14