Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 62

3 Using the touchscreen keyboard enter the address for your network share. This might be
an IP address or the network server name.
4 Tap 'connect'. A confirmation window will appear as the connection is made. Once
connected, select your folder using the list.
Once you've mounted folders from the network they will appear in the list when selecting your
active drive. For more information on selecting an active drive, refer to 'active media' earlier in
this manual.
Using the Optional Internal Cache
The cache feature on HyperDeck Extreme enables you to record up to 8K Ultra HD on to a
M.2 NVMe PCIe flash disk in case of problems with your media. This means you can use
slower external drives and CFast cards or record to network storage which in turn can be
less expensive.
The cache works as short term storage, recording your video and audio to the internal M.2 PCIe
flash disk before transferring the files to your selected media in 5 second segments. These
5 second segments then make up a single continuous file on your storage media.
Once you've installed a PCIe flash disk, all future recordings will be saved to the cache prior to
your storage media. Even if you turn your HyperDeck Extreme off, any files recorded prior that
weren't transferred to a CFast card or external disk will still be there!
Choosing your M.2 NVMe PCIe Flash Disk
When choosing an M.2 NVMe PCIe flash disk for the cache, it is a good idea to keep in mind
future workflows and not just current ones. By selecting a flash disk that is capable of recording
the highest frame rates and resolutions, you can be sure you won't miss a frame, even with the
slowest CFast cards or external disks.
Using the Optional Internal Cache 62