HyperDeck Extreme Control Front Panel
In this section of the manual you will find detailed descriptions of all the features on your
HyperDeck Extreme Control.
1
2
3
1
1
2
3
IN
OUT
6
DELETE
INPUT
PREROLL
7
EDIT
EJECT
5
1
Playback and record buttons
16 numbered buttons let you select which deck is the player and which deck is the
recorder. Use the M button to select multiple playback and record decks.
2
Player and Recorder buttons
Player and recorder buttons let you select your player or recorder device. Once you press
the player button, the status indicators and timecode will update to reflect the deck or
device selected as player.
3
Timecode Display
The timecode display will update to the connected deck when the numbered playback or
record button or 'player' or 'recorder' button is selected. When a drive or tape is ejected,
the timecode display will revert to the deck default, generally 00:00:00:00.
4
Search dial, indicator LEDs and mode buttons
There are three modes when using the large search dial; shuttle, jog and position. The row
of LED lights will indicate the search direction depending on which mode is selected. Turn
the dial left or right to fast forward or rewind.
5
Transport Controls
Traditional transport controls provide familiar playback controls including play, stop, record
and edit. The skip buttons are for file based decks such as a HyperDeck recorder.
6
Timecode Entry and Trim buttons
You can select your in and out points and refine them frame by frame by using the
timecode entry and trim buttons.
7
Deck status indicators
LED indicators will display the status of the deck letting you know when it is ready for
playback and recording.
PLAYBACK
4
5
6
7
8
4
5
6
7
8
RECORD
6
ENTRY
TRIM
PLAYER
RECORDER
SKIP
REC
SKIP
REW
PLAY
F FWD
3
HOURS
MINUTES
SECONDS
M
SHUTTLE
JOG
M
2
REF
SERVO
REMOTE
STOP
HyperDeck Extreme Control Front Panel
FRAMES
POSITION
4
78