Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 60

NOTE Spill recording is available when multiple cards and drives are connected.
Your HyperDeck Extreme will automatically spill recording from one CFast card to
another when it is full. Once the second CFast card is full, recording will spill over to
the active USB disk.
Connecting to Network Storage
When HyperDeck Extreme disk recorders are connected to your network via Ethernet, you can
use network storage for recording and playback. For example, recording clips to Blackmagic
Cloud Store. Once your HyperDeck Extreme and network storage are on the same network,
you can add the network storage location to HyperDeck Extreme. It's worth noting that the
optional cache is needed when recording to network storage to prevent the recording ending
in the event of a network outage or dropout.
To add network storage:
1 Tap on the storage icons in the lower toolbar on the HyperDeck Extreme to open the
storage display.
2 Tap the 'network' button on the lower right hand corner of the display.
3 Servers on your network will appear in the list view. If you can find your preferred server,
tap the name to highlight it and tap the 'connect' button. When prompted enter your
username and password or tap 'connect as guest' if your storage does not require
credentials.
Storage Media 60