Getting Started with
HyperDeck Extreme HDR
This section of the manual shows how to get started using HyperDeck Extreme.
Getting started is as simple as connecting power, plugging in your video and audio, inserting
a formatted CFast card and pressing the record button! You can then stop recording and play
back your files using the built in touchscreen or transport control buttons on the front panel.
However, you can also connect Blackmagic HyperDeck Extreme Control and operate your
HyperDeck remotely. This is a powerful external controller with many features including a
search dial for precise jog and shuttle control. An entire section dedicated to HyperDeck
Extreme Control is provided later in this manual.
Plugging in Power
To power your HyperDeck Extreme, connect a standard IEC cable to the AC power input on
the rear of the unit. You can also use the 12V DC input if you want to connect external power
or redundancy via an external power supply, for example an uninterruptible power supply or
external 12V battery.
Connect power to the AC or DC power inputs on
the rear of HyperDeck Extreme 8K HDR
Getting Started with HyperDeck Extreme HDR
5