Publicidad
Idiomas disponibles
Idiomas disponibles
Use the slider or arrow to select your zebra percentage
TIP
You can also set the zebra to highlight areas of your image that represent specific
video levels on a waveform, for example setting the zebra for 50% means you can
visually identify which regions of your image will appear at approximately 50% on a
waveform scope.
Focus Assist
Focus assist gives you powerful tools to help focus your image fast. Focus assist displays
edge lines on the sharpest areas of the image. To turn on focus assist, toggle the switch to on.
Sensitivity settings let you change how strong the lines are using percentage values. In images
with lots of detail and high contrast, the lines can be distracting, so in these conditions you can
move the slider to between 0% and 50%.
Alternatively, for low contrast shots with less detail, select 'high' so the lines are stronger and
easier to see. If you find lines are too visually intrusive, you can select 'peak' levels instead.
For more information on how to set peak levels, see 'monitor' settings later in this manual.
Touchscreen Display
18
Publicidad
