Descargar Imprimir esta página

Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 58

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 535
Status
Text underneath the progress bar will display either the storage space remaining or the status
of the slot.
Capacity remaining
When your storage media has space remaining, the duration available will be displayed in
hours:minutes:seconds based on the current source format and your chosen codec and quality
settings. If there is less than an hour left, it will display minutes:seconds remaining only.
If a valid source is not detected, the available storage remaining on the media will display in
gigabytes or terabytes.
Slot status
'No card' and 'no drive' will display if there is no media connected to that drive slot.
Once a CFast card or drive is full, the icon will display 'card full' or 'drive full' so you know it's
time to swap out the storage media. If you have another CFast card inserted, the recording
will automatically spill over and start recording onto it. If you have USB-C disk connected, the
recording will spill over when the second CFast card is full.
A locked drive will be shown with 'locked' under the progress bar.
If you see 'blocked' display underneath the progress bar, this means you are unable to play or
record to that media. To resume playback or recording on that CFast card or drive, eject it and
reconnect. The CFast card or ext disk will now be available.
Active storage media
When using HyperDeck Extreme, you can connect up to 2 CFast cards, 5 ext drives and
network storage all at once. This means you can access terabytes of recording space all from
the one HyperDeck Extreme disk recorder!
If you only have a single drive or CFast card connected, it is your active media for all playback
and recording.
If you are using more than one card or drive, you can select which one you want to use for
recording and playback.
Selecting Active Media
1
Tap on the drive icon area in the bottom screen.
2
In the storage media window, three large icons will appear. Tap on the heading of the
media you want to make active. In playback mode the active media will appear blue.
In record mode the active drive will be red.
Storage Media
58

Publicidad

loading

Este manual también es adecuado para:

Hyperdeck extreme controlHyperdeck extreme 8k hdr