The time counter to the left of the timeline bar displays the current location of the playhead and
the time counter to the right displays the total duration of all clips.
You can navigate along the timeline by tapping the 'skip' back and 'skip' next icons.
Tap the skip back button once to move the playhead to the first frame of the current clip.
If the playhead is already on the start of a clip, it will jump to the first frame of a previous clip.
You can also use the skip buttons to enter shuttle mode for greater playback speeds.
Press and hold either of the skip buttons down until the icon changes to a blue with two
arrows. Now you can use can change the playback speed from x1/2 up to x50 speed
by either holding down the button or tapping it to change the speed in set increments.
To reduce the speed, simply press the shuttle button in the other direction.
To exit shuttle mode, simply press either the 'stop' or 'play' buttons and the buttons will revert
to the skip forward and skip backward icons. When in shuttle mode, you can increase shuttle
speed by tapping the shuttle forwards or backwards buttons more than once. To decrease the
speed, tap on the alternate shuttle button.
For example, when shuttling forwards at an increased speed, tap the shuttle backwards button
to decrease the speed. This lets you avoid using the stop button, which will take you out of
shuttle mode.
When using the fast forward shuttle mode, press the rewind
icon to stop playback but remain in shuttle mode.
To leave playback mode, press 'stop' once to stop playback and 'stop' again to return to
record mode.
NOTE
It is worth noting that when in record mode, pressing the skip buttons
performs no action.
Touchscreen Display
25