Setup Page 3
The third page of the setup tab lets you set your network preferences. This can also be set via
the HyperDeck Setup utility. Connecting HyperDeck Extreme to your network means you can
record directly to network storage, remotely control the unit via HyperDeck Ethernet protocol or
transfer files to and from the unit using an FTP client or the Blackmagic Web Media Manager.
DHCP
To connect to your network via a dynamic IP address, toggle the switch to on. To manually set
a static IP address, toggle it to off.
IP Address
When DHCP is switched 'off', you can enter your network details manually. Click on the pencil
edit icon. Enter the IP address into the numeric keypad view. Once you have entered your
address, press the 'update' button.
When you edit any numeric option, a numeric keyboard will
appear. Type in the address and press update to confirm.
Gateway
Set your network gateway address by clicking on the pencil icon to open the numeric keypad.
Press update to return to the menu.
Subnet Mask
Your subnet mask can be manually entered by clicking pencil edit icon. Once you have entered
your address, click the update icon to return to the menu.
Settings
40