toscano TDS600 Serie Manual De Usuario página 125

01.
Forbid to connect AC power source to output terminal U,V,W,
otherwise it could cause inverter completely damage.
02.

ot allow for short circuit between(-) and (+) otherwise it could
cause inverter damage and power source short circuit.
03.
Forbid to install inverter on fl ammable objects, otherwise it may
cause fi re.
04.
Do not install inverter in a environment with explosive gas, it may
cause explosion.
05.
Bare connection terminal should be insulation treatment after main
loop connection, otherwise it may cause electric shock.
06.
Do not operate inverter with wet hands when inverter power on,
otherwise it may cause electric shock.
07.
Inverter earth terminal should be well grounding connection.
08.
Do not open the front cover for wiring when inverter power on.
Inverter wiring and check must handle after 10 minutes of inverter
power off.
09.
Wiring connection should handle by qualifi ed person and not allow
to slip any conductive objects inside inverter, otherwise it may cause a
electric shock or inverter damage.
10.
When inverter stocked for more than 6 months, using voltage
regulator to boost voltage up and keep inverter in standy status for 1
hour, otherwise it may cause electric shock and explosion.
01.
Forbid to connect control terminals except TA, TB, TC to AC
220V/380V signal, otherwise it may cause inverter completely damage.
02.
Do not install and run inverter when inverter damage or spare part
less, otherwise it may cause fi re or human injury.
03.
Inverter should install in a place where can accept itself weight,
otherwise it may cause inverter drop down or belongings damage.
1. Safety information and use notice points
121