toscano TDS600 Serie Manual De Usuario página 165

For some serious failure, such as inverse module protect, over current:
over voltage etc.: must not carry on failure reset forcibly to make the
inverter run again without failure elimination confi rmed. Otherwise
have danger of damaging the inverter!
04. Function code editing status
Under waiting, run or failure alarm status, press
status (If user password is set, can enter into editing status after inputting
the password, see also F27.00 description and Fig.5-10), and editing status the password, see also F27.00 description and Fig.5-10), and editing status
is displayed according to three classes menu mode, is displayed according to three classes menu mode,
5-5. To press
parameter display status, to press parameter display status, to press
operation; To press
storing modifi ed parameter.
key can enter into one class by one class. Under function key can enter into one class by one class. Under function
key can only come back to upper class menu without
Fig.5-5 keypad display status switching
5. Run and operation explanation for inverter
key, can enter into editing
key to carry on parameter storage
as shown in Fig.
161