Frequency-Provision Channel - toscano TDS600 Serie Manual De Usuario

0: keypad
Control by key
1: Control terminal
Use control terminal FWD, REV, COM to make of double-line control, or use one
terminal of X1~X8 and FWD or REV to make of three-line control.
2: Communication port
Control run and stop of the inverter through upper machine or other device
which can communicate with the inverter.
Choose order channel by setting function code F01.15; and also can choose
by multi-function input terminal (F08.18~F08.25 choose function 49, 50, 51,
52, 53).
Also can reach switch the command channel through multi-function key
Please make switching debugging in advance when switch the order
channel to check if it can fulfi ll system requirement, otherwise have
danger of damaging device and injuring personal.
5.1.2. 5.1.2 Frequency-provision channel
TDS600 includes main frequency provision and assist frequency provision:
Main frequency provision:
0: keypad analog potentiometer provision;
1: AI1 analog setting;
2: AI2 analog setting;
3: Terminal UP/DOWN adjustment provision;
4: Communication provision (Modbus and external bus share a main frequency
memory);
5: EAI1 analog setting (extend effective);
6: EAI2 analog setting (extend effective);
7: High speed pulse provision (X8 terminal need select the corresponding
function);
8: Terminal pulse width provision (X8 terminal need select the corresponding
function);
, , on keypad (factory default).
5. Run and operation explanation for inverter
.
153