Terminal Control - toscano TDS600 Serie Manual De Usuario

F00.15 Button function
selection
F00.16 Multi-function key
run command
channel switching
order selection
F00.17 Motor speed display
coeffi cient
F00.18 Line speed display
coeffi cient
F00.19 Extended terminal
accessories
selection setting
170
5:Fault record return to default.(only fault
record parameter group(F26 group)
parameter return to default)
hundreds digit: Key operation
0: All locked 0: All locked
1: Except button: the others locked button: the others locked button: the others locked
2: Except , , button: the others
locked
3: Except , button: the others
locked
4: Except , button: the others
locked
. units digit: panel button selection
0: Reversal command action button
1: Jog action button 1: Jog action button
. tens digit: multi-function button
function selection
0:Invalid.
1: Jog run. multi-function button as jog run
button, run direction decided by unit bit of
F01.16's .
2: For/rev switching. press this button to
change the run direction when run: then
press the same button change to another
direction.
3: Free stop. setup free stop function and
stop mode F02.11 the same function with
1 Jog run.
4: Switching to run command provide mode
as the setup order of F00.16.
5: Forward/Reverse Torque Switching
6~9: Reserved
. hundreds digit: terminal run command
control
0: Keyboard button invalid
1: Keyboard button valid
. thousands digit: communication run
command control
0: Keyboard button invalid
1: Keyboard button valid
→
0: Keyboard control

terminal control

communication control
← →
1: Keyboard control
← →
2: Keyboard control
control
← →
3: Terminal control communication
Control
0.1~999.9%
0.1~999.9%
0: invalid
1: Reserved
2: Reserved
3: incremental PG encoder
4~10: Reserved
1
1
→
terminal control
communication
0.1%
0.1%
1
0001 o
0 o
100.0% o
1.0% o
0 ×