The 3-D Digi-Adjustor; Basic Function; Typical Application Changing The Menu Text Language - Multiplex Cockpit SX Manual De Instrucciones

C SX
OCKPIT

11. The 3-D digi-adjustor

11.1. Basic function

The 3-D digi-adjustor is a key feature of the C
SX, making it very simple, fast and convenient to oper-
ate. By
• turning (left
or right
• pressing (brief or long
it is possible to adjust everything which has to be ad-
justed on the C SX. The three methods of oper-
OCKPIT
ating the adjustor have the following effects:
1. rotating left or right
- leafing through menus
- changing values
2. brief press
- switching to sub-menus
- leaving sub-menus via EXIT
- opening values prior to adjusting (activating)
- completing an adjustment process
3. long press (longer than 3 sec.)
- interrupting an adjustment process
returning to INFO 1 display
from any menu
- when the displayed value is flashing:
reset to works (default) setting
- in the status displays "INFO 2, 3 and 4":
resets the displayed timer or timers
Audible confirmation
Every time you turn or press the 3-D digi-adjustor you
will hear an audible beep to confirm your action.
A long press has only registered when you hear a
second confirmation beep.
Symbol description for the 3-D digi-adjustor
Symbol Function
short press
long press (> 3 sec)
turn right
(clockwise)
turn left
(anti-clockwise)
11.2. Typical application:
Changing the menu text language
The default language for the menu texts of the C
SX is English. That is why we have taken the task of
switching the language as a detailed example. Follow-
ing these instructions will familiarise you with the func-
tions of the 3-D digi-adjustor.
Note: summary of menus
The separate menu summary will help you to find the
desired menu point quickly.
OCKPIT
) and
)
OCKPIT
This is the procedure for selecting the menu text
language:
1. Switch the transmitter on.
The screen displays the last set RF
channel and the associated fre-
quency.
2. Confirm the displayed frequency (channel) with a
long press
confirmation beep).
Status LED glows constantly
RF remains off
Status display INFO 1 appears
or
Warning "THR > 0" appears
move throttle control to the idle /
motor OFF position.
3. Now move to the "TEXT" menu.
Turn the 3-D digi-adjustor to the left
until MENU appears
Press the 3-D digi-adjustor briefly ,
SETUP appears
Press the 3-D digi-adjustor briefly ,
MODEL appears
Turn the 3-D digi-adjustor to the
right until TRANSM appears
(if SENDER appears, German is
selected as the screen text
language)
Press the 3-D digi-adjustor briefly ,
BAT AL appears
Turn the 3-D digi-adjustor to the
right until TEXT appears
4. Open the menu point for adjustment.
Press the 3-D digi-adjustor briefly ,
EN or DE appears, flashing
EN = English
DE = Deutsch (German)
Select the screen text language
(turn the 3-D digi-adjustor
5. Press the 3-D digi-adjustor briefly to confirm your
choice. The sub-menu "TEXT" re-appears. The
language select process is completed.
A long press
display.
Page 16
on the 3-D digi-adjustor (wait for the
)
now takes you directly to the INFO 1