Complete Transmitter Reset; Version Information; (Setup, Transm) -Ver; The Info Displays - Multiplex Cockpit SX Manual De Instrucciones

C SX
OCKPIT
12.1.4.

Complete transmitter reset

SETUP, TRANSM)
Menu: (
In this menu you can reset the transmitter to the state
in which it was delivered. This means:
• Model memory 1 contains a model of the EASY type.
• Data in model memories 2 to 12 is erased.
• The owner's name is reset to "------".
• The menu text language is set to "EN" (English).
Moving to the RESET menu:
to MENU
(MODEL appears)
(BAT AL appears)
Press the 3-D digi-adjustor briefly
(the "0" flashes). You must now set the number 12
using the 3-D digi-adjustor.
The transmitter RESET is only carried out if you
switch it off while the number "12" is flashing.
We selected this procedure in order to exclude the
possibility of carrying out a total RESET accidentally.
The number 12 was deliberately chosen as the key
number, and it can easily be remembered because the
C SX has twelve model memories.
OCKPIT
12.1.5.

Version information

(SETUP, TRANSM)
Menu:
This menu displays the version of the software installed
in your transmitter.
Moving to the -VER- menu:
to MENU
(MODEL appears)
(BAT AL appears)
in the -VER- menu
In the INFO 6 display you will find the Version No.
below the owner's name.
RESET
(SETUP appears)
to TRANSM
to RESET
to open the menu
-VER-
(SETUP appears)
to TRANSM
to -VER-
in the INFO 6 display.

12.2. The INFO displays

The following table shows the seven INFO displays and
what they show.
You can "leaf through" the INFO displays by turning the
3-D digi-adjustor (
INFO 1
INFO 2
resets Timer 1 *
INFO 3
resets Timers 1 and 2 *
INFO 4
resets Timer 2 *
INFO 5
Transmitter operating time
INFO 6
INFO 7
Transmission frequency
* In INFO displays 2 to 4 you can reset the various
timers with a long press
Page 18
).
Model type symbols
Memory number
Model name
Battery voltage
Model type symbols
Memory number
Timer 1
Battery voltage
Model type symbols
Memory number
Timer 1
Timer 2
Model type symbols
Memory number
Timer 2
Model type symbols
Memory number
Model type symbols
Memory number
Owner's name
Software version
Model type symbols
Memory number
Channel
on the 3-D digi-adjustor.