Malossi MULTIVAR 2000 Manual Del Usuario página 35

» continue 5111812
• Sports use
n° 4 rolls gr. 24 + n° 4 rolls gr. 21 placing them
in alternate way (Fig. 14)
• Racing use
n° 8 rolls gr. 21 (suggested setting with
modified exhaust)
Fig. 13
Fig. 14
5111885
Suggestions for the setting
The variator is supplied with two different roller
sets: one of 14 gr. and one of 16 gr. in order to
change the number of revolutions of the gear
curve of your vehicle perfectly adjusting its speed
and acceleration.
• 200 cc : n° 6 rolls gr. 14
• 250 - 300 cc : n° 6 rolls gr. 16
35
5112026
• After the original variator is disassembled, fit the
Fig. 15 - 16.
Malossi Multivar as in
• Do not insert nothing between the hub and the
fixed half-pulley.
• Assembly the original fixed half-pulley (the one
Fig. 17.
with the fins) –
• Insert the washer included into the kit
• Insert the nut (Fig. 19).
• Kick-starter toothed nut: insert a washer
thickness 1.5 mm between the fixed half-
pulley and the starter toothed nut, as shown in
Fig. 20 -21.
Fig. 15
(Fig. 18).