Lowara GEMK Serie Instrucciones Para La Instalación Y El Uso página 113

Programming the control unit – SET UP
9.6
Read and follow the operating instructions carefully before you start programming to prevent incorrect
settings which will cause malfunction.
All modifications must be done by qualified technicians!
PROGRAMMING MUST BE DONE ONLY WITH THE ENGINE TURNED OFF AND THE THREE-WAY
ATTENTION
SWITCH TURNED TO ITS "MAN" POSITION!
Turn the three-way switch to "MAN" mode.
Power the electric panel only after connecting the batteries. Press and hold the PROG / RESET / ENTER button for more than 5
seconds and the cursor will start blinking.
1 2
SETUP
PASSWORD
1
How to set the functions
 Use the UP and DOWN keys to select the parameter required.
 Use the ENTER key to enter programming mode (the cursor blinks).
 Use the UP and DOWN keys to edit the value.
 Press the PROG/RESET/ENTER key to confirm the value.
Repeat this procedure to set each function
You can exit or leave the SETUP program at any time by turning the keyswitch to its "0" or "AUT" position!
Programmable functions (password 066)
Language date time
SELECTABLE
FUNCTION
FIELDS
Language 000/003
Day of the week
Hour
Minutes
Day
Month
Year
*Note: Group 1, Group 2 in relation to the languages available in the software version
RPM/H MODE
006
2
DEFAULT
VALUES
000
1 – 7
-
0 – 24
-
0 – 59
-
1 – 31
-
1 – 12
-
0 – 99
-
Description
1 - Name of parameter
2 - Value
The UP key to increase the value
The DOWN key to decrease the value
The ENTER key to confirm
Password: 006
GROUP 1 GROUP 2
000 = English 000 = English
001 = Italian 001 = French
002 = Finnish 002 = German
003 = Portoguese 003 = Dutch
1 = Monday
2 = .....
113
NOTES*