Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 12

You can also lock the program view on the screen by double pressing the button. Press again
to return to your camera's live image.
Press and hold the program button marked PGM to monitor the switcher's program output
To check that tally is working, switch camera 1 to the program output. The tally light on your
studio camera should now illuminate. If not, double check your ATEM camera ID is set to the
corresponding input on the switcher.
Your camera is now successfully connected to the ATEM switcher.
When your studio camera is switched to the program output, the tally light will illuminate
Recording Blackmagic RAW to USB
Finally, if you want to record to Blackmagic RAW on your camera, all you need to do is plug a
USB-C flash disk formatted to Mac OS Extended or exFAT into your camera's USB connector
and tap the record button on the touchscreen! Press again to stop recording.
When recording, the record button displays red
TIP When connected to an ATEM Mini Pro or Extreme model switcher, you can also
trigger recording on all cameras from the switcher.
That's all there is to getting started! Keep reading this manual for more comprehensive
information about all the controls and settings on your Blackmagic Studio Camera.
Getting Started 12