Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 16

Tally Light
Your studio camera has a small tally indicator on the LCD, plus a large tally light on the top
panel. When your camera is connected to an ATEM switcher, the tally light lets the talent and
camera operator know which camera is on air, which camera is about to go live and if the
camera is recording.
When your camera is on air, the tally indicators illuminate red, green when switched to the
preview output and orange when ISO recording.
Your camera also features clip-on transparent camera numbers that attach to the tally light,
making it easy for talent to see camera numbers up to 20 feet away.
Camera is switched to the program output and is live on air.
Camera is switched to the preview output and about to go on air.
Recording to a USB-C flash disk.
NOTE When the camera is not connected to a switcher the tally light will illuminate red
as a simple record tally indicator.
Tally Light Number Template
Editable PDF's are provided in the software installer allowing you to edit and print out your own
custom tally numbers to match ones provided. After installing the Blackmagic cameras software
these can be found on a Mac in the Application > Blackmagic Cameras > Documents folder and
on a PC in the Blackmagic Design > Documents folder.
Tally light numbers can be easily changed
Using Studio Camera Controls 16