Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 61

ATEM Camera ID
If you're using more than one Blackmagic Studio Camera 4K Pro with an ATEM Switcher and
want your cameras to receive tally signals from the switcher, you'll need to set their ATEM
camera ID numbers. This ensures the switcher sends the tally signal to the correct cameras.
The camera ID number can be set to a value of 1-99 by tapping the left or right buttons. The
default setting is 1.
Color Bars
Outputting color bars rather than a preview image can be useful when connecting your Studio
Camera 4K Pro to a switcher or external monitor. The appearance of your studio camera's color
bars on your switcher or monitor confirms the connection, and you can perform basic monitor
calibration based on the colors of the bars. To turn on color bars for all outputs on Blackmagic
Studio Camera 4K Pro, including the LCD touchscreen, simply tap the 'color bars' switch icon.
Reference Source
Blackmagic Studio Camera 4K Pro can lock to an internal or external reference source. When
connecting to an ATEM switcher directly using SDI, setting this to 'external' will genlock the
camera to the switcher's 'program return' feed via the camera's SDI input.
Reference Timing
These settings allow you to manually adjust the reference timing on a line or pixel basis. Simply
tap the arrow icons on either side of the "lines" and "pixels" settings to make adjustments.
Setup Settings Page 3 on Blackmagic Studio Camera 4K Pro
The third page of the 'setup' tab contains the following settings for Blackmagic Studio
Camera 4K Pro.
Program Audio Source
When connected to an ATEM switcher, setting 'program audio source' to 'switcher' prioritizes
the program return audio as your input source to be mixed with talkback when monitoring using
headphones or a headset. This is useful when you are not feeding the switcher audio from your
camera but you still want to listen to the program feed from the switcher via the 'SDI in' port.
Setting 'program audio source' to 'AFV', or audio follows video, prioritizes audio that is being
displayed on your LCD. That means if the camera's LCD is displaying what the camera is seeing,
you will hear that audio source, but if you have engaged the program return feed, your audio
source will be coming from the program audio feed.
Menu Settings 61