Channel Source
Use the 'channel 1 source' and 'channel 2 source' buttons to select your audio source for each
audio channel. Below is a description of each channel source setting.
Camera Left or Right
Records from your camera's internal microphones.
Camera Mono
Creates a single audio channel from your Blackmagic Studio Camera's built in
microphone's left and right channels.
XLR Line
Uses Blackmagic Studio Camera 4K Pro's XLR input to record line level audio.
XLR Mic
Records mic level audio from Blackmagic Studio Camera 4K Pro's XLR input. If phantom
power is enabled and you have the XLR input set to 'mic' you'll also see a '+48V'
indicator here. It is also important to ensure that the 48V switch gets turned 'off' when
you disconnect your phantom powered microphone.
3.5mm Left – Line
Uses only the left channel of the 3.5mm input as line level audio.
3.5mm Right – Line
Uses only the right channel of the 3.5mm input as line level audio.
3.5mm Mono – Line
Creates a mono mix of the left and right channel from the 3.5mm input as line
level audio.
3.5mm Left – Mic
Uses only the left channel of the 3.5mm input as mic level audio.
3.5mm Right – Mic
Uses only the right channel of the 3.5mm input as mic level audio.
3.5mm Mono – Mic
Creates a mono mix of the left and right channel from the 3.5mm input as mic
level audio.
None
Disables your audio channel.
NOTE
When selecting the 3.5mm input as an audio source, the channel 1 and channel
2 sources both need to be line level or mic level. This means that if you select '3.5mm
left - line' as your channel 1 source, the available options for the 3.5mm input on
channel 2 will all be line level: '3.5mm left - line', '3.5mm right - line' and '3.5mm mono -
line'. The mic level options will be grayed out.
Channel 1/2 Level
The level meters help you set the correct audio level.
Channel 1/2 Gain
Use these sliders to adjust the recording levels of your chosen channel 1 and 2 sources.
Menu Settings
57