Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 37

Double Tap to Zoom
You can magnify any part of your Blackmagic Studio Camera's preview image by double
tapping the LCD touchscreen. The area you tap will be magnified, and you can move around the
image by dragging your finger around the LCD touchscreen. This is very helpful when checking
focus. To return to standard magnification, simply double tap your camera's touchscreen again.
The digital zoom feature can be assigned to a function button and is referred to as 'focus zoom'.
Pinch to Zoom
You can adjust the zoom level on the LCD touchscreen with a pinch to zoom multitouch gesture.
This does not affect the HDMI output.
To start zooming at x2, double tap on the touchscreen. Pinch out to increase magnification and
pinch in to decrease. Touch and drag to move the magnified area. To return to the standard
magnification, double tap on the touchscreen again.
Touch to Focus
You can focus your lens in any region of the image by tapping and holding on the LCD screen in
the area that you want to focus. If you want to focus on a magnified area of the screen, double
tap and then tap and hold to auto focus. Double tap to return to normal viewing.
Full Screen Mode
It can be useful when framing or focusing a shot to temporarily hide the lower third overlays on
the touchscreen, for example the histogram, storage indicators and audio meters. The status
display at the top of the screen features above and separate from the image, so is always
visible. To hide lower third overlays, swipe up or down on the LCD touchscreen. The record
indicator, frame guides, grids, focus assist and zebra remain visible.
Swipe up or down to hide lower third overlays on the LCD touchscreen
Touchscreen Controls 37