Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 52

HDMI Output
Your studio camera's HDMI output supports 2160p and 1080p independently of your recording
resolution. The video standard will match your camera's project frame rate.
The HDMI output can determine the video format and frame rate supported by other HDMI
equipment and sets the output accordingly. For example, if you connect to displays, ATEM
switchers and HyperDeck disk recorders that support HD only, your camera will automatically
set the HDMI output to 1080p.
If your equipment can accept 2160p, you can set the HDMI output to 2160p or 1080p.
SDI Monitor Settings Page 2
The second page of Blackmagic Studio Camera 4K Pro's SDI monitor tab contains settings
unique to the SDI output.
'3G-SDI output' options are available when outputting a 1080p signal at 50, 59.94
or 60 fps
Status Text
Set to 'off' to hide the lower third overlays on the SDI output, leaving only the information
necessary to compose or direct a shot. Lower third overlays include the histogram, storage
indicators and audio meters. Overlays such as frame guides, grids, focus assist and zebra
remain visible if enabled.
Display Status Text For Cinematographer or Director
The LCD touchscreen displays information such as gain, white balance, and aperture that is
useful to a camera operator or cinematographer. Your camera's SDI output, however, can also
show information useful for a director or script supervisor who is keeping track of multiple shots
or cameras.
HDMI Output
Menu Settings 52