Using Atem Software Control; Camera Control; Using Camera Control - Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento

Using ATEM Software Control

Camera Control

Your Blackmagic Studio Camera can be controlled from an ATEM switcher using the Camera
Control feature in ATEM Software Control. Clicking on the 'camera' button in ATEM Software
Control opens the camera control feature. Settings such as iris, gain, focus and zoom control are
easily adjusted using compatible lenses, plus you can color balance cameras and create unique
looks using the DaVinci Resolve primary color corrector that's built into the camera.
On HDMI ATEM switchers, ATEM Software Control automatically detects which camera is
connected to each input, so the tally signals will always trigger the appropriate cameras.
However, if you want to change the button mapping so camera inputs appear on different
buttons, you can do that in the button mapping settings in ATEM Software Control's preferences.
On SDI ATEM switchers the camera control data, tally and talkback is sent over the program
return feed to the camera. On SDI models you will need to set the camera numbers manually if
using more than one camera.
ATEM Camera Control.

Using Camera Control

Camera Control Selection
The button row at the top of the camera control page lets you select the camera number you
would like to control
Channel Status
The channel status at the top of each camera controller displays the camera label, On Air
indicator and lock button. Press the lock button to lock all the controls for a specific camera.
When on air, the channel status illuminates red and displays the On Air alert.
Using ATEM Software Control 79