Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 53

Your Blackmagic Studio Camera 4K Pro can display director specific status text
on its SDI output
Setting the status text to 'director' in the SDI monitor settings changes the status text for that
output to show the following information.
FPS
Displays the currently selected frames per second for that camera. If off speed frame
rate is disabled, only the project frame rate is shown. If an off speed frame rate is being
used, the sensor frame rate is shown, followed by the project frame rate.
CAM
Displays the camera index as set in your camera's slate. For more information, see the
'slate' section.
OPERATOR
Identifies the camera operator as set in your camera's slate. For more information, see
the 'slate' section.
DURATION DISPLAY
Displays the duration of the current clip while recording, or the last recorded clip in the
following format:
hours:minutes:seconds.
REEL, SCENE, TAKE
Displays the current reel, scene and take. For more information on reels, scenes, takes
and their labelling conventions, refer to the 'slate' section.
DYNAMIC RANGE
The bottom left hand corner of the monitor displays the currently applied LUT, if applied
to that output. If no LUT is applied, 'film' or 'video' dynamic range is displayed.
TIMECODE
The bottom right of the monitor displays your camera's timecode, in the following format:
hours:minutes:seconds:frames.
Menu Settings 53