Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 49

Grid
Tap the 'grid' switch in the 'LCD', 'HDMI' or 'SDI' menus to enable a rule of thirds grid for those
outputs. For more information on the rule of thirds grid, see the 'touchscreen controls' section.
False Color
Tap the 'false color' switch in the 'LCD', 'HDMI' or 'SDI' menus to enable false color exposure
assistance for those outputs. For more information, see the 'menu settings' section in
this manual.
Safe Area Guide
Tap the 'safe area' switch in the 'LCD', 'HDMI' or 'SDI' menus to enable safe area overlay for
those outputs. For more information on the safe area guide, see the 'touchscreen controls'
section in this manual.
NOTE Use the 'safe area guide' percentage setting in your Blackmagic Studio
Camera's 'both' monitoring settings to set the size of the safe area guide.
LCD Monitor Settings Page 2
The second page of your Studio Camera's 'LCD' monitor tab contains settings unique to your
LCD touchscreen.
'Status text' gives you a clear view of your camera's preview image
Status Text
Set to 'off' to hide the lower third overlays on the LCD touchscreen, leaving only the information
necessary to compose or direct a shot. Lower third overlays include the histogram, storage
indicators and audio meters. Overlays such as frame guides, grids, focus assist and zebra
remain visible if enabled.
Display
Instead of a histogram and audio meters, your camera can display codec and resolution
information instead. This can be useful if you prefer to use false color for dialling in exposure, or
are recording audio separately and want to display additional information in the space normally
used by the histogram and audio meter. Simply tap 'meters' or 'codec and resolution' in the
'LCD' menu to select your preferred view.
Menu Settings 49