Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 54

SDI Output
Blackmagic Studio Camera 4K Pro's SDI output supports 2160p, 1080p and 1080i
independently of your recording resolution. When set to 2160p or 1080p the video standard will
match your camera's project frame rate.
Interlaced HD is available on your SDI output when your project frame rate is set to 50p, 59.94p
or 60p and this will be sent as 1080i50, 59.94 or 60 accordingly.
SDI Output
3G SDI Level A/B
You can change the 3G-SDI output standard to maintain compatibility with 3G-SDI equipment
that supports either level A or level B 3G-SDI. This option is available when outputting 1080p at
50, 59.94 or 60 fps via SDI out.
All Monitor Settings Page 1
Monitor settings that affect all of your studio camera's outputs are grouped within the 'all' menu,
or 'both' on Blackmagic Studio Camera 4K Plus. For example, setting 'safe area guide' to 90% in
this menu will set the safe area guide to 90% for your camera's LCD, plus HDMI and SDI outputs
depending on which model studio camera you are using.
There are two pages of 'all' settings. The first page of your studio camera's 'all' monitor tab
contains the following settings.
Frame Guides
Tap the left or right arrows in the 'frame guides' menu setting to cycle through frame guide
options for all outputs on your studio camera. The options are detailed in the 'touchscreen
controls' section of this manual, and are also accessible from the LCD monitoring menu in your
LCD touchscreen head up display. It's worth noting that you can individually select whether
frame guides will appear on your LCD touchscreen, HDMI output and SDI output in their
respective 'monitor' menus.
Menu Settings 54