Right Panel - Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento

Right Panel

6 HDMI Output
The full size HDMI connector supports 10-bit 4:2:2 2160p Ultra HD video up to 60
frames per second with support for two channels of embedded audio. Use the
touchscreen menu to set a clean feed or include overlays on the output.
You can use the HDMI port to connect to an external monitor, disk recorder or ATEM
switcher. HDMI 2.0 cables are recommended if outputting Ultra HD footage.
NOTE When connecting via HDMI to an ATEM Mini, your camera's HDMI output
standard will be automatically set to HD. This also applies when connecting to
HD equipment such as HD monitors and HD HyperDeck disk recorders.
7 SDI Out
The 12G-SDI out connector on Blackmagic Studio Camera 4K Pro connects video
to professional SDI video equipment such as an ATEM switcher or HyperDeck
disk recorder.
8 SDI In
The 12G-SDI input on Blackmagic Studio Camera 4K Pro is used to connect the
program return feed from an SDI switcher.
9 Ethernet PoE
Blackmagic Studio Camera 4K Pro features a 10G Ethernet port with PoE. To power
the camera through this port, an advanced high power PoE power supply such as the
Blackmagic Studio Converter or a PoE type 4 power supply is required.
10 Locking Power Input
The 12-18 Volt DC locking power connector accepts the AC power supply that is
provided with your camera. The locking ring prevents accidental disconnection. You can
also use this connector to plug in a battery power supply if AC power is not available.
11 4 pin XLR Power Input
Blackmagic Studio Camera 4K Pro provides a 12 to 18 Volt 4 pin male XLR connector for
plugging in a redundant power supply from external sources such as the URSA 4 pin
AC to 12V DC power supply or portable batteries.
6
7
8
9
10
11
Studio Camera Connections 14