Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 80

Camera Settings
The camera settings button near the bottom left of the master wheel lets you adjust detail
settings for each camera's picture signal.
Detail
Use this setting to sharpen the image from your cameras live. Decrease or increase the
level of sharpening by selecting: Detail off, detail default for low sharpening, medium
detail and high detail.
Color Wheel
The color wheel is a powerful feature of the DaVinci Resolve color corrector and used
to make color adjustments to each YRGB channel's lift, gamma and gain settings.
You can select which setting to adjust by clicking on the three selection buttons above
the color wheel.
Master Wheel
Use the master wheel below the color wheel to make contrast adjustments to all YRGB
channels at once, or luminance only for each lift, gamma or gain setting.
Reset Buttons
The reset button near the bottom right of each camera controller lets you easily
choose color correction settings to reset, copy or paste. Each color wheel also has
its own reset button. Press to restore a setting to its default state, or copy/paste a
setting. Locked controllers are not affected by the Paste feature. The master reset
button on the bottom right corner of the color corrector panel lets you reset lift, gamma
and gain color wheels plus Contrast, Hue, Saturation and Lum Mix settings. You can
paste color correction settings to camera controllers individually, or all cameras at
once for a unified look. Iris, focus, coarse and pedestal settings are not affected by
the Paste feature. When applying Paste to all, a warning message will appear asking
you to confirm your action. This is so you don't accidentally paste new settings to any
unlocked cameras that are currently on air.
Each camera controller displays the channel
status so you know which camera is on air
When applying 'paste to all', a warning message will appear
asking you to confirm your action
Using ATEM Software Control 80