Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 64

Setup Settings Pages 5 and 3
The fifth page of the 'setup' tab on Blackmagic Studio Camera 4K Pro contains the following
settings. This is the third page for Blackmagic Studio Camera 4K Plus.
Tally Light LED
In some shooting environments, for example a dimly lit location or an intimate theater
performance, you may want to disable the tally light on your camera. To disable the tally light,
simply set 'tally light LED' to 'off'. When disabling the tally LED, this will also disable the back
light LEDs in all buttons and status lights.
LED Brightness
To set the brightness of the tally light LED, tap 'low,' 'medium,' or 'high'. This will also change the
brightness of all back light LEDs on buttons and status lights.
Hardware ID
The 'hardware ID' indicator displays an 8 character identifier for your Blackmagic Studio
Camera. This is unique to each camera. A longer, 32 character version of this ID is also included
in the metadata for Blackmagic RAW. This can be useful for identifying which footage came
from a particular camera.
Software
Displays the version number of currently installed software. See the 'Blackmagic Camera Setup
Utility' section for more information on updating software.
Menu Settings 64