Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 62

Program Mix
This setting changes the balance of camera sound to talkback sound. The headphones
will output audio following what is displayed on the LCD. For instance, if you are in camera
view, camera audio is heard. If you are in program view, program audio is heard. The default
setting is 100%.
Headset Mic
Move this volume slider left or right to increase or decrease audio microphone input levels.
The default setting is 50%.
Sidetone Level
Adjust this slider to set the volume of your own voice mic in your headset.
TIP Blackmagic Studio Camera 4K Pro has a powerful talkback mic preamp so care
should be taken when adjusting your mic gain or sidetone levels with 3.5mm mini jack
consumer earbuds or headsets. Often these are not very well electrically shielded
which can cause crosstalk. If you do encounter this then setting your sidetone very low
will cancel out the feedback being caused by your headset.
Setup Settings Pages 4 and 2
The fourth page of the 'setup' tab on Blackmagic Studio Camera 4K Pro contains the following
settings. These settings are on the second page for Blackmagic Studio Camera 4K Plus.
Set Function Button
Next to your studio camera's LCD touchscreen, you'll notice three function buttons, 'F1', 'F2'
and 'F3'. These are mappable to frequently used features and are quickly accessible when
operating your camera live and want to avoid using the touchscreen.
Menu Settings 62