5 Pin XLR Talkback Connector Pinout Diagram
External views
5 pin XLR
'headset' connector
Using Studio Camera Controls
Your Blackmagic Studio Camera features a large, bright 7" LCD touchscreen so you can monitor
the live image, plus change settings directly from the LCD. Simply press the onscreen menu
button to access the menus and change settings using tap and swipe gestures.
Dials on the right side let you change screen brightness and contrast as well as focus peaking
sensitivity.
The settings dial on the left side lets you adjust the aperture on compatible micro four thirds
lenses, plus change settings and adjust parameters in combination with the head up display.
Settings Dial
Rotate the dial counterclockwise to open the iris and clockwise to close.
The settings dial is also used to adjust white balance, shutter speed and gain settings when
they are selected on the camera's head up display.
When the 'focus zoom' function is enabled, the image is magnified for you to see greater detail.
You can adjust the magnification by turning the dial. Pressing and rotating the dial lets you
reposition the cropped image.
Pins
Signal
1
Intercom MIC (Y)
2
Intercom MIC (X)
3
GND
4
Intercom left
5
Intercom right
I/O
Description
GND
The intercom mic input supports
electret condenser mics and dynamic
mics, which can be balanced or
unbalanced. Pin 1 is the mic signal
common, and pin 2 is the mic signal
In
input for both types. With electret
mics, a DC bias supply is also output
via the same mic signal input pin.
GND
GND
Out
Out
Using Studio Camera Controls
15