Ec Declaration Of Conformity (Original) - Xylem LOWARA e-SVE Traducción De Las Instrucciones Originales

en – Original Instructions
6 Declarations
Refer to the specific marking declaration found on the
product.
6.1.1 EC Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio Maggiore VI
- Italy, hereby declares that the product:
Pump unit with integrated variable speed drive, with or
without pressure transmitter and relative cable (see
adhesive on the last page)
fulfils the relevant provisions of the following European
Directives
• Machinery 2006/42/EC and subsequent
amendments (ANNEX II - natural or legal person
authorised to compile the technical file: Xylem
Service Italia S.r.l.)
• Eco-design 2009/125/EC and subsequent
amendments, Regulation (EU) no. 547/2012 and
subsequent amendments (water pump) if MEI
marked,
and technical standards:
• EN 809:1998+A1:2009, EN 60335-1:2012+A11:
2014 +A13:2017, EN 60335-2-41:2003+
A1:2004+A2:2010, EN 62233:2008
• EN 61800-9-1:2017, EN 61800-9-2:2017.
Montecchio Maggiore, 28/09/2021
Marco Ferretti
Chairman of the Board of
Directors
rev.00
6.1.2 EU Declaration of Conformity
(No 19)
1. EMC - Apparatus/Product model:
see adhesive on the last page
RoHS - Unique identification of the EEE:
HME, VME, SVE, SVIE.
2. Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy.
3. This declaration of conformity is issued under the
sole responsibility of the manufacturer.
4. Object of the declaration:
Pump unit with integrated variable speed drive, with
or without pressure transmitter and relative cable
(see adhesive on the last page).
5. The object of the declaration described above is in
conformity with the relevant Union harmonization
legislation:
18
• 2014/30/EU Directive of 26 February 2014 and
subsequent amendments (electromagnetic
compatibility)
• 2011/65/EU Directive of 8 June 2011 and
subsequent amendments, including the (EU)
2015/863 Directive (restriction of the use of
certain hazardous substances in electrical and
electronic equipment).
6. References to the relevant harmonised standards
used or references to the other technical
specifications, in relation to which conformity is
declared:
• EN 60730-1:2011, EN 61800-3:2004+A1:2012
(Category C2), EN 55014-1:2006+A1:2009
+A2:2011, EN 55014-2:1997+A1:2001+A2:2008,
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
• EN IEC 63000:2018.
7. Notified body: -.
8. Additional information:
RoHS – Annex III – Applications exempt from the
restrictions: lead as a binding element in steel and
copper alloys [6(a), 6(c)], in solders and in
electrical/electronic components [7(a), 7(c)-I].
Signed for and on behalf of: Xylem Service Italia S.r.l.
Montecchio Maggiore, 28/09/2021
Marco Ferretti
Chairman of the Board of
Directors
rev.00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.
6.1.3 UKCA Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio Maggiore VI
- Italy, hereby declares that the product:
Pump unit with integrated variable speed drive, with or
without pressure transmitter and relative cable (see
adhesive on the last page)
fulfils the relevant provisions of the following legal acts
• S.I. 2008/1597 - Supply of Machinery (Safety)
Regulations 2008 and subsequent amendments
(Schedule 2 - Part 2 - Annex II - natural or legal
person authorised to compile the technical file:
Xylem Service Italia S.r.l.)
• S.I. 2019/539 - The Ecodesign for Energy-Related
Products and Energy Information (Amendment) (EU
Exit) Regulations 2019 (water pump) if MEI marked,
and technical standards:
• EN 809:1998+A1:2009, EN 60335-1:2012+A11:
2014 +A13:2017, EN 60335-2-41:2003+A1:2004
+A2:2010, EN 62233:2008
• EN 61800-9-1:2017, EN 61800-9-2:2017.