Corghi Artiglio 50 Manual De Uso página 52

* In a very few cases, a manual "help" accessory supplied as standard may be of use in simplifying de-
mounting where excessive lubricant has been applied and/or where tyres are combined with unusual rims
(see fig. 34).
- A pedal-controlled pneumatically operated wheel lift (optional) which loads and un-
loads the wheel to and from the working position
The ARTIGLIO 50 also achieves the following:
- Reduced physical effort on the part of the operator
- No risk of damage to rim and tyre
Each machine carries a nameplate 19 fig. 5 with its identification data and some techni-
cal data.
As well as the manufacturer's details, it carries: Mod. - Machine model; V - power supply voltage in
Volts; A - Current absorption in Amps; kW - Power absorption in kW; Hz - Frequency in Hz; Ph - Number
of phases; bar - Operating pressure in bar; Serial N. - Machine serial number; ISO 9001 - Guarantee of
certification of the company Quality System; CE - CE mark.
WARNING
The data on the nameplate may never be altered or defaced for any reason.
- Overall dimensions (see fig. 4):
• Length .............................................................................................................. A = 1500 mm
• Length ............................................................................................................ A1 = 1565 mm
• Width ................................................................................................................. B = 955 mm
• Width (with wheel lift) ................................................................................. B1 = 1290 mm
• Max width when fully open ......................................................................... B2 = 1580 mm
• Height min ....................................................................................................... H = 1810 mm
• Height max ...................................................................................................... H = 2000 mm
- Tyre types processed ................................. conventional runflat with reinforced sidewall
- Wheel dimension range:
• rim diameter ................................................................................................ from 12" to 30"
• maximum tyre diameter .............................................................................. 1200 mm (47")
• maximum tyre width .................................................... 15" (from wheel support surface)
- Turntable:
• rest ..............................................................................................................................flanged
• centring ..................................................................................................................... on cone
• clamping ............................................................................................... mechanical-manual
• drive system .......................................................................... 2-speed motor-inverter unit
• rotation torque ........................................................................................................1100 Nm
• rotation speed ......................................................................................................7 - 18 rpm
- Bead Breaker Unit:
• tool ..................................................................................................................................disc
• positioning in relation to rim .................................... manual with mechanical clamping
• penetration .................................................................................................................guided
• maximum bead breaking range ..............................A = 670 mm (see diagram page 13)
• bead breaker stroke ................................................B = 540 mm (see diagram page 13)
52
TECHNICAL DATA
and/or with internal support
Operator's manual Artiglio 50