Corghi Artiglio 50 Manual De Uso página 77

Power cord conductor shorting to ground.
➥ Check the wiring.
Motor shorted.
➥ Renew the motor.
➥ Replace motor-inverter unit circuit board.
➥ Check pedal unit microswitch.
Belt broken.
➥ Replace belt.
Rotation control pedal fails to return to the central position
Control spring broken.
➔ Renew the spring.
No vertical travel
➥ Check for bent hoses.
➥ Check operation of raising-lowering valve.
➥ Check for jammed rollers.
Bead breaker unit is underpowered, it does not break the bead
Perform the checks in the previous point: "Bead breaker unit not working".
Cylinder seals worn.
➥ Renew seals.
➥ Renew bead breaker cylinder.
Bead breaker cylinder leaks air around the rod
Air seal worn.
➥ Renew seals.
➥ Renew bead breaker cylinder.
Gear unit noisy. The table top makes 1/3 of a revolution
Gear unit seizing.
➥ Renew gear unit.
Handle engagement unit faulty.
➔ Check that it is synchronised properly.
➔ Replace the plate in the turntable.
Operator's manual Artiglio 50
TROUBLE SHOOTING
Table top will not rotate
Bead breaker unit not working
and is leaking air
and then stops
Table top fails to clamp wheels
GB
77