Publicidad
Idiomas disponibles
Idiomas disponibles
E - Turntable and deflation pedal control unit
E1 - Tyre inflation pedal
Press with the Doyfe union of the inflation line fitted to the valve to deliver air into the
tyre and inflate it.
E2 - Turntable rotation pedal
This pedal starts rotation of the turntable to which the wheel is fixed. The pedal has 4
different positions, providing 4 different rotation speeds.
1. Pedal raised (without detent): slow anti-clockwise rotation.
2. Pedal in rest position (with detent): turntable at a standstill.
3. Pedal pressed slightly down (without detent): slow clockwise rotation.
4. Pedal pressed right down (without detent): fast clockwise rotation.
F - Wheel lift (optional) pedal control unit
F1 -
Pedal pressed (without detent): wheel lifting, operation on "hold-to-run" principle.
F2 -
Pedal pressed (without detent): wheel descent, operation on "hold-to-run" principle.
Risk of crushing.
Never insert any part of the body, and in particular hands, between
the bead breaker disc or demount/mount tools and the wheel.
Never insert a hand between the turntable and the wheel.
Never insert any part of the body between the wheel lift and other
components with which it comes into contact.
NEVER stand behind the machine. Only one operator may operate
and use the machine.
NEVER stand or pass beside the machine when in operation.
The tool arm and bead breaking unit swing sideways
Operator's manual Artiglio 50
Key to danger warning decals
Risk of crushing.
GB
57
Publicidad
