Corghi Artiglio 50 Manual De Uso página 53

• bead breaking cylinder force .................................................................................. 7600 N
- Wheel lift:
• operation .......................................................................... automatic lifting/manual tilting
• drive ..................................................................................................................... pneumatic
• lifting capacity .............................................................................................................. 85 Kg
- Power supply:
• electric 1 Phase ...........................................................................230V-0.75 kW 50Hz/60 Hz
• electrical 1 Phase (alternative) .................................................110V-0.75 kW 50Hz/60 Hz
• pneumatic operating pressure ............................................................................8÷9.5 bar
- Weight ..................................................................................................310 kg (with wheel lift)
- Noise level
• Weighted noise level A (LpA) in working position .........................................< 70 dB (A)
The stated noise levels are emission levels and do not necessarily represent safe op-
erating levels. Although there is a relationship between emission levels and exposure
levels, this cannot be used reliably to establish whether or not further precautions are
necessary. The factors which determine the level of exposure to which the operator is
subjected include the duration of the exposure, the characteristics of the workplace,
other sources of noise, etc. The permitted exposure levels may also vary from country
to country. However, this information will enable the machine's user to make a more ac-
curate evaluation of the hazard and risk.
TOP
OPTIONAL ACCESSORIES
For the full list of optional accessories for the ARTIGLIO 50 TYRE CHANGER, refer to the
"ORIGINAL ACCESSORIES" handbook supplied with the machine.
RIM CENTRING/CLAMPING ACCESSORIES
For the diagram concerning optimal use of the centring and clamping accessories depend-
ing on rim type, see fig. 37 onward.
Operator's manual Artiglio 50
BEAD BREAKER STROKE
AND THEIR USE
MAXIMUM BEAD
BREAKER RANGE
GB
53