A1 Technical Data - Hitecsa EQPL-B 4360 Manual Del Operador

A1 TECHNICAL DATA

Model EQPLB
Nominal cooling capacity (*)
EER
ESEER +
Nominal cooling capacity (*) (°) EN 14511:2013
EER (*) (°) EN 14511:2013
ESEER EN 14511:2013
Sound pressure (***) (*)
Sound power (****) (*)
Sound power with FNR accessory (****)(*)
Scroll/step compressor
Circuits
Fans
Fan nominal air flow
Heat exchanger
Heat exchanger nominal flow water side (*)
Water side heat exchanger nominal pressure drops (*) kPa
Residual head P1 (*)
Residual head P2 (*)
Residual head ASP1 (*)
Residual head ASP2 (*)
Tank water content (ASP1/ASP2)
Nominal heating capacity RC100 (±)
Nominal flow rate/pressure drop RC100 (±)
Nominal heating capacity DS (±)
Nominal flow rate/pressure drop DS (±)
Amount of R410A refrigerant
Polyester oil charge
Electrical data
Absorbed power (*) (■)
Pump absorbed power (P1/ASP1) / (P2/ASP2)
Electrical power supply
Auxiliary electrical/control power supply
Nominal current (■)
Maximum current (■)
Starting current (■)
Starting current with SFS (■)
Pump absorbed current (P1/ASP1) / (P2/ASP2)
Dimensions
Height (a)
Width (b)
Length (c)
Heat exchanger inlet/outlet connections and RC100
DS inlet/outlet connections
Weight
(*) Under the following conditions: condenser inlet air temperature 35°C;
chilled water temperature 7°C; temperature differential at evaporator 5 K;
fouling factor equal to 0.35x10
(***) Sound pressure level in dB(A) referring to a 10 m distance from the
unit, in free field and directionality factor equal to Q=2. The noise data
refers to the units without the electric pump.
(****) Sound power level in dB(A) on the basis of measurements taken in
accordance with UNI EN-ISO 9614 and Eurovent 8/1 Standards. The
noise data refers to the units without the electric pump
kW
kW
dB(A)
dB(A)
dB(A)
n°
n°
n° x kW 6x1.8 6x1.8 6x1.8 8x1.8 8x1.8 8x1.8 10x1.8
m³/h
Type
m³/h
kPa
kPa
kPa
kPa
l
kW
m³/h / kPa 80,8/65 88/74 98,7/70 110,9/74 121,4/86 134,1/81 142,9/82 149,9/60 164,1/74 177,3/84 186,7/78 196/86
kW
m³/h / kPa
Kg
Kg
kW
kW
V-ph-Hz
V-ph-Hz
A
A
A
A
A
mm
mm
mm
Ø
Ø
Kg
-4 m 2 K/W.
ALLEGATI / ENCLOSED DOCUMENTS / ANNEXES / ANLAGEN / ANEXOS
4360 4390 4435 5500 6540 6590 6635 6670 7730 8790 8830 8860
361 391 436 498 541
2,93 2,88 2,85 3 2,94 2,81 2,98 2,95 2,98 2,88 2,85 2,84
4,75 4,74 4,72 4,83 4,79 4,72 4,77 4,76 4,84 4,76 4,75 4,72
359,8 389,6 434,6 496,3 538,9 587,9 637,7 666,5 732,4 784,0 827,1 861,8
2,9 2,84 2,81 2,96 2,9
4,11 4,1 4,09 4,16 4,15 4,09 4,14 4,06 4,19 4,12 4,11 4,08
62 63 64 64 64
94 95 96 96 96
89 90 91 91 91
4/4 4/4 4/4 5/5 6/6
2 2 2 2 2
119500 119500 119500 159500 159500 159500 199000 199000 238000 238000 238000 238000
Plates/Shell and tube (STE accessory)
62,1 67,2 75 85,6 93
38 43 40 44 50
100 87 114 98 77
139 125 173 160 140
91 76 100 89 65
129 114 160 151 129
700 700 700 1000 1000 1000 1000 1000 1000 1000 1000 1000
470 512 574 645 706
93 99 113 127 139
8/5 8,5/6 9,7/7 10,9/8 12/9 13/9 14,1/9 15/15
35 35 38 47 47
20,8 20,8 20,8 26 31,2 31,2 31,2 31,2 36,4 41,6 41,6 41,6
4360 4390 4435 5500 6540 6590 6635 6670 7730 8790 8830 8860
123,0 136,0 153,0 166,0 184,0 210,0 215,0 227,0 247,0 273,0 291,0 305,0
4,0/5,5 4,0/5,5 5,5/7,5 5,5/7,5 5,5/7,5 5,5/7,5 5,5/7,5 5,5/7,5
230 – 1 – 50 / 24 – 1 – 50
202 223 251 273 302
268 308 326 366 398
494 504 549 588 624
379 397 430 469 509
7,6/10,5 7,6/10,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 14,5/21 14,5/21 14,5/21 14,5/21
4360 4390 4435 5500 6540 6590 6635 6670 7730 8790 8830 8860
2450 2450 2450 2450 2450 2450 2450 2450 2450 2450 2450 2450
2260 2260 2260 2260 2260 2260 2260 2260 2260 2260 2260 2260
3740 3740 3740 4840 4840 4840 5940 5940 7150 7150 7150 7150
DN80 DN80 DN80 DN100 DN100
VIC VIC VIC VIC VIC
2" VIC 2" VIC 2" VIC 2" VIC 2" VIC
2130 2140 2200 2670 2860 2890 3205 3230 3870
(±) Recovery unit heating capacity Conditions referring to the unit
operating with chilled water temperature 7°C, differential temperature due
to evaporation of 5 K, hot water temperature produced equivalent to
40/45°C (RC100) 50/60°C (DS).
(■) Absorbed power/absorbed current without electric pump.
The peak current refers to the unit's most heavy duty operating
conditions.
(°) Data calculated in accordance with EN 14511:2013 under nominal
conditions.
The refrigerant charge values are indicative. Refer to the serial number
plate.
230
590 640 669 735 787
2,77 2,93 2,90 2,93 2,84 2,81 2,80
64 64,5 64,5 64,5 64,5 65,0 66,0
96 97 97 97 97
91 92 92,5 92,5 92,5 93,0 94,0
6/6 6/6 6/6 7/6 8/6
2 2 2 2 2
10x1,8 12x1,8 12x1,8 12x1,8 12x1,8
101,4 110 115,0 126,4 135,3 142,7 148,7
46 48 50 48 53
85 73 61 92 80
114 102 86 134 123
72 57 44 85 72
100 86 69 128 115
780 831 872 954 1031 1091 1140
151 164 175 203 206
17,5/28 17,7/31 18,7/35 19,1/40
51 61 61 86 86
7,5/11 7,5/11 7,5/11 7,5/11
400 – 3 – 50
345 353 373 406 448
458 480 494 556 610
684 702 717 780 808
549 582 598 661 702
DN100 DN100 DN100 DN125 DN125
VIC VIC VIC VIC VIC
2"1/2 2"1/2 2"1/2
3" VIC 3" VIC 3" VIC 3" VIC
VIC VIC VIC
4020 4100 4120
830 865
98 99
8/6 8/6
2 2
48 52
78 69
122 112
70 60
113 103
218 222
92 92
478 501
631 653
856 877
736 758
DN150 DN150
VIC VIC