Hitecsa EQPL-B 4360 Manual Del Operador página 233

Model EQPHB
Nominal cooling capacity (*)
EER
ESEER +
Nominal cooling capacity (*) (°) EN 14511:2013
EER (*) (°) EN 14511:2013
ESEER EN 14511:2013
Nominal heating capacity (**)
COP
Nominal heating capacity (**) (°) EN 14511:2013
COP (*) (°) EN 14511:2013
Sound pressure (***) (*)
Sound power (****) (*)
Sound power with FNR accessory (****)(*)
Scroll/step compressor
Circuits
Fans
Fan nominal air flow
Heat exchanger
Heat exchanger nominal flow water side (*)
Water side heat exchanger nominal pressure drops (*) kPa
Residual head P1 (*)
Residual head P2 (*)
Residual head ASP1 (*)
Residual head ASP2 (*)
Tank water content (ASP1/ASP2)
Nominal heating capacity RC100 (±)
Nominal flow rate/pressure drop RC100 (±)
Nominal heating capacity DS (±)
Nominal flow rate/pressure drop DS (±)
Amount of R410A refrigerant
Polyester oil charge
Electrical data
Absorbed power in summer mode (*) (■)
Absorbed power in winter mode (**) (■)
Pump absorbed power (P1/ASP1) / (P2/ASP2)
Electrical power supply
Auxiliary electrical/control power supply
Summer operation nominal current (*) (■)
Maximum current (■)
Starting current (■)
Starting current with SFS (■)
Pump absorbed current (P1/ASP1) / (P2/ASP2)
Dimensions
Height (a)
Width (b)
Length (c)
Heat exchanger inlet/outlet connections and RC100
DS inlet/outlet connections
Weight
(*) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 7°C; temperature differential at
evaporator 5 K; evaporator scaling factor equal
to 0.35x10-4 m2 K/W.
(**) In the following conditions: Evaporator inlet
water temperature 7°C B.S., 6°C B.U.; hot
water temperature 45°C; temperature
differential at condenser 5 K; fouling factor
equal to 0.35x10-4 m2 K/W.
(***) Sound pressure level in dB(A) referring to
a 10 m distance from the unit, in free field and
directionality factor equal to Q=2. The noise
ALLEGATI / ENCLOSED DOCUMENTS / ANNEXES / ANLAGEN / ANEXOS
4360 4390
kW 348 370
2,83 2,7
4,62 4,51
kW 346,9 368,7
2,8 2,67
4 3,9
kW 373 397
3,03 2,96
kW 374,2 398,4
3,01 2,94
dB(A) 62
dB(A) 94
dB(A) 89
n° 4/4 4/4
n° 2
n° x kW 6x1.8 6x1.8
m³/h 115000 115000
Type
m³/h 59,8 63,6
36
kPa 105
kPa 144 134
kPa 92
kPa 131 119
l 700 700
kW 457 492
78,6/63 84,6/71
m³/h / kPa
kW 90
7,7/5 8,3/6
m³/h / kPa
Kg 68
Kg 20,8 20,8
4360 4390
kW 123 137
kW 123 134
kW 4,0/5,5 4,0/5,5
V-ph-Hz
V-ph-Hz
A 202 225
A 268 308
A 494 504
A 379 397
A 7,6/10,5 7,6/10,5
4360 4390
mm 2450 2450
mm 2260 2260
mm 3740 3740
Ø
DN80 VIC DN80 VIC DN80 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC
2" VIC 2" VIC
Ø
Kg 2700 2710
data refers to the units without the electric
pump
(****) Sound power level in dB(A) on the basis
of measurements taken in accordance with UNI
EN- ISO 9614 and Eurovent 8/1 Standards The
noise data refers to the units without the electric
pump
(±) Recovery unit heating capacity Conditions
referring to the unit operating with chilled water
temperature 7°C, differential temperature due to
evaporation of 5 K, hot water temperature
produced equivalent to 40/45°C (RC100)
50/60°C (DS). NB. With heat pumps operating
in winter mode with DC active, the heating
234
4435 5500
412 467
2,68 2,81
4,49 4,57
410,7 465,4 509,1
2,64 2,78
3,89 3,94
436 486
3,05 3
437,4 487,7
3,03 2,98
63 64 64
95 96 96
90 91 91
4/4 5/5
2 2 2
6x1.8 8x1.8 8x1.8
115000 153000 153000
Plates/Shell and tube (STE accessory)
70,8 80,3
40 37 41
96 125 113
183 174
81 106 107
165 167
700 700
551 614
94,8/67 105,6/71 116,4/81 128,3/76 136,7/77 143,9/84
96 108 121
9,3/7 10,4/8 11,4/9
68 91 91
20,8 33
4435 5500
154 166
143 162
5,5/7,5 5,5/7,5 5,5/7,5
400 – 3 – 50
230 – 1 – 50 / 24 – 1 – 50
253 273
326 366
549 588
430 469
10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5
4435 5500
2450 2450
2260 2260
3740 4840
2" VIC 2" VIC 2" VIC 2"1/2 VIC 2"1/2 VIC 2"1/2 VIC
2780 3400
capacity available is decreased from the portion
supplied to the desuper- heater.
(■) Absorbed current/absorbed power value
without electric pump.
The peak current refers to the unit's most heavy
duty operating conditions.
(°) Data calculated in accordance with EN
14511:2011 under nominal conditions.
The refrigerant charge values are indicative.
Refer to the serial number plate
6540 6590 6635
511 555 603
2,75 2,63 2,79
4,54 4,48 4,57
553,2 600,9
2,71 2,6 2,76
3,93 3,88 3,96
528 590 636
2,95 2,99 3,06
530 592,1 638,3
2,93 2,97 3,04
64 64 64,5
96 96 97
91 91 92
6/6 6/6 6/6
2 2 2
8x1.8 10x1.8
153000 191000 191000
87,9 95,4 103,7
46 42 44
94 99 88
156 126 116
86 90 77
148 117 105
700 700 1000
677 746 795
133 145 157
12,5/9 13,5/9 14,2/10
91 94 112
46 46 46
6540 6590 6635
186 211 216
179 197 208
5,5/7,5 5,5/7,5
305 346 355
398 458 480
624 684 702
509 549 582
6540 6590 6635
2450 2450 2450
2260 2260 2260
4840 4840 5940
3580 3640 4080
6670
634
2,79
4,55
631,7
2,75
3,95
669
3,03
671,5
3
64,5
97
92,5
6/6
2
10x1.8
109
48
71
96
59
84
1000
837
165
112
46
6670
227
221
5,5/7,5
373
494
717
597
6670
2450
2260
5940
4120