Hitecsa EQPL-B 4360 Manual Del Operador página 236

Model EQPHBSS
Nominal cooling capacity (*)
EER
ESEER +
Nominal cooling capacity (*) (°) EN 14511:2013
EER (*) (°) EN 14511:2013
ESEER EN 14511:2013
Nominal heating capacity (**)
COP
Nominal heating capacity (**) (°) EN 14511:2013
COP (*) (°) EN 14511:2013
Sound pressure (***) (*)
Sound power (****) (*)
Scroll/step compressor
Circuits
Fans
Fan nominal air flow
Heat exchanger
Heat exchanger nominal flow water side (*)
Water side heat exchanger nominal pressure drops (*) kPa
Residual head P1 (*)
Residual head P2 (*)
Residual head ASP1 (*)
Residual head ASP2 (*)
Tank water content (ASP1/ASP2)
Nominal heating capacity RC100 (±)
Nominal flow rate/pressure drop RC100 (±)
Nominal heating capacity DS (±)
Nominal flow rate/pressure drop DS (±)
Amount of R410A refrigerant
Polyester oil charge
Electrical data
Absorbed power in summer mode (*) (■)
Absorbed power in winter mode (**) (■)
Pump absorbed power (P1/ASP1) / (P2/ASP2)
Electrical power supply
Auxiliary electrical/control power supply
Summer operation nominal current (*) (■)
Maximum current (■)
Starting current (■)
Starting current with SFS (■)
Pump absorbed current (P1/ASP1) / (P2/ASP2)
Dimensions
Height (a)
Width (b)
Length (c)
Heat exchanger inlet/outlet connections and RC100
DS inlet/outlet connections
Weight
(*) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 7°C; temperature differential at
evaporator 5 K; evaporator scaling factor equal
to 0.35x10-4 m2 K/W.
(**) In the following conditions: Evaporator inlet
water temperature 7°C B.S., 6°C B.U.; hot
water temperature 45°C; temperature
differential at condenser 5 K; fouling factor
equal to 0.35x10-4 m2 K/W.
(***) Sound pressure level in dB(A) referring to
a 10 m distance from the unit, in free field and
directionality factor equal to Q=2. The noise
data refers to the units without the electric
pump
ALLEGATI / ENCLOSED DOCUMENTS / ANNEXES / ANLAGEN / ANEXOS
4385 4415
kW 338 368
2,68 2,57
4,70 4,69
kW 337,3 367,2
2,66 2,55
4,05 4,04
kW 368 404
3,26 3,23
kW 368,8 404,9
3,24 3,22
dB(A) 53,5 53,5
dB(A) 86 86
n° 4/4 4/4
n° 2
n° x kW 8x0,6 8x0,6
m³/h 90000 87500
Type
m³/h 58,1 63,3
21 22
kPa 129 121
kPa 168 160
kPa 125 117
kPa 164 156
l 700 700
kW 462 516
79,4/40 88,7/45
m³/h / kPa
kW 88 98
7,6/5 8,4/6
m³/h / kPa
Kg 63 92
Kg 20,8 20,8
4385 4415
kW
126 143
kW 113 125
kW 4,0/5,5 4,0/5,5
V-ph-Hz
V-ph-Hz
A 207 235
A 255 295
A 481 491
A 366 384
A 7,6/10,5 7,6/10,5
4385 4415
mm 2450 2450
mm 2260 2260
mm 4840 4840
Ø
DN80 VIC DN80 VIC DN80 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC
2" VIC 2" VIC
Ø
Kg 3395 3565
(****) Sound power level in dB(A) on the basis
of measurements taken in accordance with UNI
EN- ISO 9614 and Eurovent 8/1 Standards The
noise data refers to the units without the electric
pump
(±) Recovery unit heating capacity Conditions
referring to the unit operating with chilled water
temperature 7°C, differential temperature due to
evaporation of 5 K, hot water temperature
produced equivalent to 40/45°C (RC100)
50/60°C (DS). NB. With heat pumps operating
in winter mode with DC active, the heating
capacity available is decreased from the portion
supplied to the desuper- heater.
237
4460 5525 6570
402 454 485
2,51 2,62 2,49
4,63 4,80 4,72
401,1 453 483,9
2,49 2,6 2,47
3,99 4,14 4,09
440 492 534
3,24 3,22 3,22
441 493,2 535,3
3,22 3,2 3,2
54,5 54,5 54,5
87 87 87
4/4 5/5 6/6
2 2 2
8x0,6 10x0,6 10x0,6
87500 109000 109000
Plates/Shell and tube (STE accessory)
69,1 78,1 83,4
23 25 25
150 133 124
208 193 185
146 127 117
203 187 178
700 1000 1000
571 642 698
98,2/47 110,4/53 120/54 131,2/60 140,3/48 147/54
107 121 129
9,2/7 10,4/8 11,1/8
94 112 116
20,8 33 46
4460 5525 6570
160 173 195
136 153 166
5,5/7,5 5,5/7,5 5,5/7,5
400 – 3 – 50
230 – 1 – 50 / 24 – 1 – 50
263 284 320
313 369 401
536 591 627
417 472 512
10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5
4460 5525 6570
2450 2450 2450
2260 2260 2260
4840 5940 5940
2" VIC 2" VIC 2" VIC 2"1/2 VIC 2"1/2 VIC 2"1/2 VIC
3615 4310 4520
(■) Absorbed current/absorbed power value
without electric pump.
The peak current refers to the unit's most heavy
duty operating conditions.
(°) Data calculated in accordance with EN
14511:2011 under nominal conditions.
The refrigerant charge values are indicative.
Refer to the serial number plate
6625 6665 6700
522 580 603
2,31 2,56 2,53
4,70 4,67 4,67
520,8 578,9 601,7
2,29 2,54 2,51
4,07 4,05 4,05
597 630 660
3,23 3,26 3,25
598,6 631,4 661,6
3,21 3,25 3,23
54,5 55,5 56,5
87 88 89
6/6 6/6 6/6
2 2 2
10x0,6 12x0,6 12x0,6
109000 131000 131000
89,7 99,7 103,7
27 23 25
119 113 97
146 141 122
111 103 86
138 131 111
1000 1000 1000
763 816 855
145 154 160
12,5/9 13,2/9 13,8/8
116 146 146
46 46 46
6625 6665 6700
226 227 238
185 193 203
5,5/7,5 5,5/7,5 5,5/7,5
371 373 391
461 483 497
687 705 720
552 585 600
6625 6665 6700
2450 2450 2450
2260 2260 2260
5940 6840 6840
4550 5210 5240
2