Hitecsa EQPL-B 4360 Manual Del Operador página 234

Model EQPHBS
Nominal cooling capacity (*)
EER
ESEER +
Nominal cooling capacity (*) (°) EN 14511:2013
EER (*) (°) EN 14511:2013
ESEER EN 14511:2013
Nominal heating capacity (**)
COP
Nominal heating capacity (**) (°) EN 14511:2013
COP (*) (°) EN 14511:2013
Sound pressure (***) (*)
Sound power (****) (*)
Scroll/step compressor
Circuits
Fans
Fan nominal air flow
Heat exchanger
Heat exchanger nominal flow water side (*)
Water side heat exchanger nominal pressure drops (*) kPa
Residual head P1 (*)
Residual head P2 (*)
Residual head ASP1 (*)
Residual head ASP2 (*)
Tank water content (ASP1/ASP2)
Nominal heating capacity RC100 (±)
Nominal flow rate/pressure drop RC100 (±)
Nominal heating capacity DS (±)
Nominal flow rate/pressure drop DS (±)
Amount of R410A refrigerant
Polyester oil charge
Electrical data
Absorbed power in summer mode (*) (■)
Absorbed power in winter mode (**) (■)
Pump absorbed power (P1/ASP1) / (P2/ASP2)
Electrical power supply
Auxiliary electrical/control power supply
Summer operation nominal current (*) (■)
Maximum current (■)
Starting current (■)
Starting current with SFS (■)
Pump absorbed current (P1/ASP1) / (P2/ASP2)
Dimensions
Height (a)
Width (b)
Length (c)
Heat exchanger inlet/outlet connections and RC100
DS inlet/outlet connections
Weight
(*) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 7°C; temperature differential at
evaporator 5 K; evaporator scaling factor equal
to 0.35x10-4 m2 K/W.
(**) In the following conditions: Evaporator inlet
water temperature 7°C B.S., 6°C B.U.; hot
water temperature 45°C; temperature
differential at condenser 5 K; fouling factor
equal to 0.35x10-4 m2 K/W.
(***) Sound pressure level in dB(A) referring to
a 10 m distance from the unit, in free field and
directionality factor equal to Q=2. The noise
data refers to the units without the electric
pump
ALLEGATI / ENCLOSED DOCUMENTS / ANNEXES / ANLAGEN / ANEXOS
4360 4390
kW 336 357
2,67 2,51
4,59 4,40
kW 335 355,9
2,64 2,49
3,97 3,81
kW 357 385
3,03 2,96
kW 358,1 386,3
3,01 2,94
dB(A) 57 58
dB(A) 89 90
n° 4/4 4/4
n° 2
n° x kW 6x1.2 6x1.2
m³/h 91200 91200
Type
m³/h 57,8 61,4
34 37
kPa 110 102
kPa 149 141
kPa 98 88
kPa 137 127
l 700 700
kW 457 492
78,6/63 84,6/71
m³/h / kPa
kW 87 95
7,5/5 8,2/6
m³/h / kPa
Kg 68 68
Kg 20,8 20,8
4360 4390
kW
126 142
kW 118 130
kW 4,0/5,5 4,0/5,5
V-ph-Hz
V-ph-Hz
A 207 233
A 268 308
A 494 504
A 379 397
A 7,6/10,5 7,6/10,5
4360 4390
mm 2450 2450
mm 2260 2260
mm 3740 3740
Ø
DN80 VIC DN80 VIC DN80 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC
2" VIC 2" VIC
Ø
Kg 2900 2910
(****) Sound power level in dB(A) on the basis
of measurements taken in accordance with UNI
EN- ISO 9614 and Eurovent 8/1 Standards The
noise data refers to the units without the electric
pump
(±) Recovery unit heating capacity Conditions
referring to the unit operating with chilled water
temperature 7°C, differential temperature due to
evaporation of 5 K, hot water temperature
produced equivalent to 40/45°C (RC100)
50/60°C (DS). NB. With heat pumps operating
in winter mode with DC active, the heating
capacity available is decreased from the portion
supplied to the desuper- heater.
235
4435 5500 6540
391 446 488
2,44 2,58 2,54
4,34 4,49 4,49
389,9 444,6 486,4
2,42 2,55 2,51
3,74 3,87 3,89
423 472 517
3,04 3,01 2,97
424,3 473,6 518,9
3,02 2,99 2,95
59 59 59
91 91 91
4/4 5/5 6/6
2 2 2
6x1.2 8x1.2 8x1.2
91200 122000 122000
Plates/Shell and tube (STE accessory)
67,2 76,7 83,9
33 38 42
135 123 106
193 182 167
119 117 99
176 177 160
700 700 700
551 614 677
94,8/67 105,6/71 116,4/81 128,3/76 136,7/77 143,9/84
104 118 128
8,9/6 10,1/8 11/8
91 91 91
20,8 33 46
4435 5500 6540
160 173 192
139 157 174
5,5/7,5 5,5/7,5 5,5/7,5
400 – 3 – 50
230 – 1 – 50 / 24 – 1 – 50
263 284 315
326 366 398
549 588 624
430 469 509
10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5
4435 5500 6540
2450 2450 2450
2260 2260 2260
3740 4840 4840
2" VIC 2" VIC 2" VIC 2"1/2 VIC 2"1/2 VIC 2"1/2 VIC
2980 3710 3910
(■) Absorbed current/absorbed power value
without electric pump.
The peak current refers to the unit's most heavy
duty operating conditions.
(°) Data calculated in accordance with EN
14511:2011 under nominal conditions.
The refrigerant charge values are indicative.
Refer to the serial number plate
6590 6635 6670
534 578 606
2,44 2,63 2,61
4,43 4,59 4,58
532,4 576,1 603,9
2,41 2,6 2,58
3,84 3,98 3,97
573 614 646
2,98 3,05 3,02
575 616,1 648,4
2,96 3,03
59 59,5 60
91 92 92,5
6/6 6/6 6/6
2 2 2
8x1.2 10x1.2 10x1.2
122000 152000 152000
91,8 99,4 104,2
38 41 44
106 95 77
134 123 103
98 86 67
125 114 92
700 1000 1000
746 795 837
144 151 159
12,4/9 13/8 13,7/8
94 112 112
46 46 46
6590 6635 6670
219 220 232
192 201 214
5,5/7,5 5,5/7,5 5,5/7,5
360 361 381
458 480 494
684 702 717
549 582 597
6590 6635 6670
2450 2450 2450
2260 2260 2260
4840 5940 5940
3970 4490 4530
3
2