Hitecsa EQPL-B 4360 Manual Del Operador página 235

Model EQPH
Nominal cooling capacity (*)
EER
ESEER +
Nominal cooling capacity (*) (°) EN 14511:2013
EER (*) (°) EN 14511:2013
ESEER EN 14511:2013
Nominal heating capacity (**)
COP
Nominal heating capacity (**) (°) EN 14511:2013
COP (*) (°) EN 14511:2013
Sound pressure (***) (*)
Sound power (****) (*)
Sound power with FNR accessory (****)(*)
Scroll/step compressor
Circuits
Fans
Fan nominal air flow
Heat exchanger
Heat exchanger nominal flow water side (*)
Water side heat exchanger nominal pressure drops (*) kPa
Residual head P1 (*)
Residual head P2 (*)
Residual head ASP1 (*)
Residual head ASP2 (*)
Tank water content (ASP1/ASP2)
Nominal heating capacity RC100 (±)
Nominal flow rate/pressure drop RC100 (±)
Nominal heating capacity DS (±)
Nominal flow rate/pressure drop DS (±)
Amount of R410A refrigerant
Polyester oil charge
Electrical data
Absorbed power in summer mode (*) (■)
Absorbed power in winter mode (**) (■)
Pump absorbed power (P1/ASP1) / (P2/ASP2)
Electrical power supply
Auxiliary electrical/control power supply
Summer operation nominal current (*) (■)
Maximum current (■)
Starting current (■)
Starting current with SFS (■)
Pump absorbed current (P1/ASP1) / (P2/ASP2)
Dimensions
Height (a)
Width (b)
Length (c)
Heat exchanger inlet/outlet connections and RC100
DS inlet/outlet connections
Weight
(*) Under the following conditions: condenser
inlet air temperature 35°C; chilled water
temperature 7°C; temperature differential at
evaporator 5 K; evaporator scaling factor equal
to 0.35x10-4 m2 K/W.
(**) In the following conditions: Evaporator inlet
water temperature 7°C B.S., 6°C B.U.; hot
water temperature 45°C; temperature
differential at condenser 5 K; fouling factor
equal to 0.35x10-4 m2 K/W.
(***) Sound pressure level in dB(A) referring to
a 10 m distance from the unit, in free field and
directionality factor equal to Q=2. The noise
ALLEGATI / ENCLOSED DOCUMENTS / ANNEXES / ANLAGEN / ANEXOS
4385 4415
kW 360 400
3 2,99
4,74 4,73
kW 359,2 399
2,97 2,96
4,1 4,09
kW 386 424
3,22 3,21
kW 386,9 425
3,2 3,2
dB(A) 62,5 63,5
dB(A) 95
dB(A) 86
n° 4/4 4/4
n° 2
n° x kW 8x1.8 8x1.8
m³/h 157500 153000
Type
m³/h 61,9 68,8
24
kPa 121 109
kPa 160 147
kPa 117 104
kPa 156 142
l 700 700
kW 462 516
79,4/40 88,7/45
m³/h / kPa
kW 90 100
7,7/5 8,6/7
m³/h / kPa
Kg 63
Kg 20,8 20,8
4385 4415
kW 120 134
kW 120 132
kW 4,0/5,5 4,0/5,5
V-ph-Hz
V-ph-Hz
A 197 220
A 276 316
A 502 512
A 387 405
A 7,6/10,5 7,6/10,5
4385 4415
mm 2450 2450
mm 2260 2260
mm 4840 4840
Ø
DN80 VIC DN80 VIC DN80 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC DN100 VIC
2" VIC 2" VIC
Ø
Kg 3030 3200
data refers to the units without the electric
pump
(****) Sound power level in dB(A) on the basis
of measurements taken in accordance with UNI
EN- ISO 9614 and Eurovent 8/1 Standards The
noise data refers to the units without the electric
pump
(±) Recovery unit heating capacity Conditions
referring to the unit operating with chilled water
temperature 7°C, differential temperature due to
evaporation of 5 K, hot water temperature
produced equivalent to 40/45°C (RC100)
50/60°C (DS). NB. With heat pumps operating
in winter mode with DC active, the heating
236
4460 5525
441 500
2,98 3,05
4,71 4,76
439,9 498,7 538,6
2,95 3,02
4,08 4,1
463 519
3,22 3,22
464,2 520,4 571,5
3,2 3,2
64,5 64,5
96 97 97
86 87 87
4/4 5/5
2 2 2
8x1.8 10x1.8 10x1.8
153000 191000 191000
Plates/Shell and tube (STE accessory)
75,8 86
27 28 32
134 112
194 173
129 104
188 166
700 1000
571 642
98,2/47 110,4/53 120/54
113 126
9,7/8 10,8/9 11,8/10
92 94 112
20,8 33
4460 5525
148 164
144 161
5,5/7,5 5,5/7,5 5,5/7,5
400 – 3 – 50
230 – 1 – 50 / 24 – 1 – 50
243 269
334 374
557 596
438 477
10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5 10,5/14,5
4460 5525
2450 2450
2260 2260
4840 5940
2" VIC 2" VIC 2" VIC 2"1/2 VIC 2"1/2 VIC 2"1/2 VIC
3250 3830
capacity available is decreased from the portion
supplied to the desuper- heater.
(■) Absorbed current/absorbed power value
without electric pump.
The peak current refers to the unit's most heavy
duty operating conditions.
(°) Data calculated in accordance with EN
14511:2011 under nominal conditions.
The refrigerant charge values are indicative.
Refer to the serial number plate
6570 6625 6665
540 586 635
2,98 2,93 3,05
4,72 4,74 4,78
584,4 633,5
2,95 2,9 3,02
4,09 4,11 4,15
570 625 661
3,22 3,22 3,22
626,8 662,6
3,2 3,2 3,21
64,5 64,5 65,5
97 97 98
87 87 88
6/6 6/6 6/6
2 2 2
10x1.8 12x1.8
191000 229500 229500
92,8 100,8 109,2
32 35 29
97 100 96
161 128 125
89 90 84
152 118 113
1000 1000 1000
698 763 816
131,2/60 140,3/48
137 151 159
13/10 13,7/9
116 116 146
46 46 46
6570 6625 6665
181 200 208
177 194 205
5,5/7,5 5,5/7,5
297 328 342
406 466 488
632 692 710
517 557 590
6570 6625 6665
2450 2450 2450
2260 2260 2260
5940 5940 6840
4040 4070 4680
6700
662
3
4,77
660,3
2,97
4,14
697
3,24
698,9
3,22
65,5
98
89
6/6
2
12x1.8
113,8
32
84
109
71
96
1000
855
147/54
166
14,3/9
146
46
6700
221
215
5,5/7,5
363
502
725
605
6700
2450
2260
6840
4710