Main Menu; Program Step Recall - Corghi EXACT 7000 Manual De Uso

Main menu

Start Begins the vehicle alignment
procedure.
Alignment mode Selects the guided
wheel alignment procedure: quick, complete
or customised.
Alignment procedure Selects the
wheel alignment procedure: quick, complete
or customised.
Databank and job management Tools
for management of the jobs archive and user
databank.
Setup and maintenance Gives access
to the utility functions for wheel aligner setup
and maintenance.
Service programs Gives access to
the wheel aligner service and troubleshooting
functions.
Last job Restarts the wheel alignment
procedure by loading the data of the job just
completed.
Shutdown Activates the program closure
and wheel aligner switch-off procedure.
Help Recalls the information for the
current video page to the screen.
The on-line instructions back up the operator's
manual but do not replace it in all respects.

Program step recall

Diameter selection Recalls input of the
rim diameter to be used in toe measurements
in millimetres / inches.
Chassis clearance For vehicles where
this is necessary, recalls input of the chassis
clearances necessary to obtain the databank
references
..
58
Steering angle Recalls the steering
lock procedure for measurement of the caster,
king pin, steering angle difference at 20° and
maximum steering angle.
Data summary Recalls the summary of
the vehicle's data.
Front axle Recalls the front axle adjust-
ment step.
Rear axle Recalls the rear axle adjust-
ment step.
Data summary and printout Recalls the
job data summary, printout and save step.
End of session Ends the current job
and returns to the main menu.
Vehicle adjustment Selects the help
function for adjustment of the vehicle. Only the
help selections available are active.
Vehicle selection Recalls selection of
the vehicle from the databank.
Databank data summary Recalls the full
summary vehicle's databank references.
Chassis situation Recalls the vehicle
chassis situation step.
EZShim Recalls the EZShim calcula-
tion program.
Toe constant Recalls the toe constant
checking and adjustment procedure.
Distronic Adjustment Recalls the align-
ment screen for the equipment for adjusting
the Mercedes "Distronic" anti-collision radar
system.
Operator's Manual EXACT 7000