Job Record; Toe Curve Adjustment - Corghi EXACT 7000 Manual De Uso

The second annex, entitled "Chassis Condition",
lists the set-back, track difference, wheel-base
difference, side offset and offset values of the
axles after adjustment.
The "Print \ Type" field of the user setup can
be set appropriately to select the annexes to
be printed:
• "Alphanumeric" prints the alphanumeric pages
only.
• "Vehicle Condition" prints the alphanumeric
report and the vehicle condition annex. This
setting is indicated by the
print page status bar.
• "Chassis Condition" prints the alphanumeric
report and the chassis condition annex. This
setting is indicated by the
print page status bar.
• "Complete" prints the alphanumeric report
and both annexes.
The setup can be varied on the print page.
PRINT ON FILE. If selected, allows the
data to be printed in a CSV (Comma Separated
Values) file.
COLOUR PRINT. If selected, the printed
reports will be in colour.
PRINT PRELIMINARY CHECKS. The
preliminary check reports are printed.
ALPHANUMERIC PRINT (standard).
VEHICLE SITUATION GRAPHIC PRINT.
CHASSIS SITUATION GRAPHIC PRINT.
76
From the printing stage, access the job record
using the
instead of selection of the vehicle from the da-
tabank can also be set in the setup.
Another setting that can be made in the setup
is the type of job record to be used.
Fill in the job record by using the keys as de-
scribed in the "DATABANK MANAGEMENT"
section.
The compulsory fields are highlighted.
icon in the
When a customer or vehicle is selected from
those already on file, the relative data are
loaded in the job record (e.g., when a vehicle is
icon in the
selected by means of the registration number,
the customer and the vehicle saved in the ve-
hicle record are automatically loaded). These
data overwrite those entered previously, so
the selected vehicle may be modified in the
databank.
When a new value is entered in the REG.N.,
CHASSIS and CUSTOMER fields, a new record
is automatically opened for data input.
When the job done is saved, the vehicle and cus-
tomer records are also automatically updated.

ToE CURVE ADJUsTMEnT

This procedure is used to check the variation
in the toe when the vehicle's wheel alignment
is modified.
Locate the axle adjustment screen and select the
pop-up menu above the
(press the up arrow to open the menu). Click on
the
Follow the procedure.

JoB RECoRD

icon. Use of the job record
WARNING
"Toe Curve" icon.
Operator's Manual EXACT 7000
"front axle" icon